Re: SNMP question

no it will not from what i have seen, it needs the global command to get
them to go...

pretty easy to see with

'debug snmp packet'

and then just shut/no shut an interface after you configure an snmp host

--
Garry L. Baker
"There is no 'patch' for stupidity." - www.sqlsecurity.com
"Complexity is the enemy of reliability..."
On Thu, Mar 17, 2011 at 1:10 PM, Hussam EL Kebbi <hussamkibbi_at_hotmail.com>wrote:
> Hi Gary,
>
> Thank you for your answer.
>
> My question is: if we don't use: *snmp-server enable traps *global
> command, and since snmp trap link-status is enabled by default per
> interface, will it still send?
>
> thanks
>
>  ------------------------------
> Date: Thu, 17 Mar 2011 12:59:39 +0300
> Subject: Re: SNMP question
> From: baker.garry_at_gmail.com
> To: hussamkibbi_at_hotmail.com
> CC: ccielab_at_groupstudy.com
>
>
> short answer is yes it will send all traps:
>
>
> http://www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_18.html#wp1078142
>
>
> "To enable all Simple Network Management Protocol (SNMP) notification types
> that are available on your system, use the *snmp-server enable traps *command
> in global configuration mode. To disable all available SNMP notifications,
> use the *no *form of this command."
> trap source is used when you want or need it to come from a specific IP, in
> the lab it would be because they told you to, in the real would it would be
> because that is the IP you have register as the object-name in the NMS and
> when you log the trap you want it to have a name you will know...
>  --
> Garry L. Baker
>
> "There is no 'patch' for stupidity." - www.sqlsecurity.com
> "Complexity is the enemy of reliability..."
>
>
>
> On Thu, Mar 17, 2011 at 12:05 PM, Hussam EL Kebbi <hussamkibbi_at_hotmail.com
> > wrote:
>
> Hi Experts,
> My question is if we are sending snmp traps, and we didn't use:
> snmp-server enable traps snmp linkup linkdown , will it still send snmp
> traps?
> I mean it is enabled by default per interface as snmp trap link-status!?
> - Also when do we need to use to specify source of traps: snmp-server
> trap-source lo0?
> Thanks,
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net