RE: lab console server

I've had issues like that before too....this set of configs on async lines
for reverse telnet to term servers seems to work nice for me...

line 1 16
 exec-timeout 0 0
 no exec
 transport input all
 telnet break-on-ip
 telnet sync-on-break
 telnet ip-on-break
 flowcontrol hardware

... I have this on an old 2511 trm srvr in my lab

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Aaron Riemer
Sent: Wednesday, March 16, 2011 9:29 PM
To: 'Cisco certification'
Subject: lab console server

Hi Guys,

I have cabled up my lab and I have issues with my access server. I am
wondering if anyone has experienced this problem.

Whenever I power up my lab and try to access the console of each device I
find I have to clear the line multiple times before the connection is
accepted.

It looks like you can't clear a range of lines either and this becomes very
time consuming and annoying.

Any Ideas?

CCIE-LAB(config)#ip host R1 2001 10.0.0.1

CCIE-LAB(config)#exit

CCIE-LAB#R1

Trying R1 (10.0.0.1, 2001)...

% Connection refused by remote host

CCIE-LAB#clear line 1

[confirm]

 [OK]

CCIE-LAB#R1

Trying R1 (10.0.0.1, 2001)...

% Connection refused by remote host

CCIE-LAB#clear line 1

[confirm]

 [OK]

CCIE-LAB#R1

Trying R1 (10.0.0.1, 2001)...

% Connection refused by remote host

CCIE-LAB#clear line 1

[confirm]

 [OK]

CCIE-LAB#R1

Trying R1 (10.0.0.1, 2001)... Open

R1>en

R1#

Thanks,

-Aaron

Blogs and organic groups at http://www.ccie.net
Received on Wed Mar 16 2011 - 22:41:03 ART