Strange NAT problem

All,

I need a second set of eyes b/c I think I am going crazy here. I am trying
to do a simple NAT problem in my lab and I can not figure it out.

1. I need to have all my inside hosts get PAT to the outside interface IP
address
2. I need port forwarding from the outside from F0/0 IP address tcp port
555 to the inside host 192.168.100.105 on port 23

I logically set up my config like this....

=================================
interface FastEthernet0/0
 ip address 155.1.1.5 255.255.255.0
 ip nat outside
 ip virtual-reassembly
!
interface FastEthernet0/1
 ip address 192.168.100.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly

ip nat inside source list 10 interface FastEthernet0/0 overload
ip nat inside source static tcp 192.168.100.105 23 155.1.1.5 555 extendable

access-list 10 permit 192.168.100.0 0.0.0.255
=================================

In my mind this should work, as I think I have got it to work like this in
the past, but it is not. I have a test PC in my lab and I can not see the
connection. Can someone tell me what I might be doing wrong?

Chris

Blogs and organic groups at http://www.ccie.net
Received on Tue Mar 15 2011 - 10:47:22 ART