Re: About then EEM

Thanks for help me . I'm a chinese ,and my english is bad. I just want to
know how to get the output. now, i just do this:

event manager applet test
 event syslog pattern "Interface Loopback0, changed state to
administratively down"
 action 1.1 cli command "enable"
 action 1.2 cli command "sho ip inter br"
 action 1.3 syslog msg "$_cli_result"
 action 1.4 cli command "config t"
 action 1.5 cli command "int lo0"
 action 1.6 cli command "no shut"

  My problem is how to get the output of the first ten rows.thanks.

TZ 2011Dj3TB13HU IONg11:08#,langtao sun <vip3389_at_gmail.com>P45@#:

> Now,I have a problem for the EEM,How to configure the EEM for this question
> ?
>
> Use the EEM,when then interface lo0 is down, the syslog will pus the first
> ten rows of the !0show ip interface brief!1 command output.And don's use
> then "|" and "pattern" optins. Please help me,thans.
>

--
Mac.sun
Blogs and organic groups at http://www.ccie.net