RE: PVDM2 in voice lab

Hi
I checked out the " show voice dsp group all" in my 2x2811 and 1x2801, the
second PVDM2 16 isn't up always. The PVDM2 16 card is good.
But whatever I tried, only PVDM2 in slot 1 can be enabled. Any idea how to
enable it in second slot ?

R2#sh voice dsp group all
DSP groups on slot 0:
dsp 1:
  State: UP, firmware: 23.8.0
  Max signal/voice channel: 16/16
  Max credits: 240
  num_of_sig_chnls_allocated: 3
  Transcoding channels allocated: 0
  Group: FLEX_GROUP_VOICE, complexity: FLEX
    Shared credits: 240, reserved credits: 0
    Signaling channels allocated: 3
    Voice channels allocated: 0
    Credits used: 0
dsp 5:
  State: FAIL, firmware: 0.0.0
  Max signal/voice channel: 16/16
  Max credits: 240
  num_of_sig_chnls_allocated: 0
  Transcoding channels allocated: 0
  Group: FLEX_GROUP_VOICE, complexity: FLEX
    Shared credits: 240, reserved credits: 0
    Signaling channels allocated: 0
    Voice channels allocated: 0
    Credits used: 0

Thanks,

Tortle

> From: matthn_at_gmail.com
> Date: Sat, 5 Feb 2011 10:12:45 -0500
> Subject: Re: PVDM2 in voice lab
> To: sbabatunde1_at_ca.rr.com
> CC: tortletang_at_hotmail.com; carl.gosselin_at_altizone.com;
ccielab_at_groupstudy.com
>
> Check out 'show voice dsp group all'
>
> This will list the DSPs and what is being used on each. Each 16 is 1 DSP,
> and conferencing takes up an entire DSP whether a conference is going on or
> not. Like mentioned, you've likely got a T1/E1 that's eating partially
> through the 2nd DSP.
>
> There shouldn't be a difference between 2801/2811/2901/2911/etc.
>
> -nick
>
> On Sat, Feb 5, 2011 at 8:19 AM, Babatunde Sanda
<sbabatunde1_at_ca.rr.com>wrote:
>
> > If you already have cards like fxo and fxs installed, this cards are
given
> > priority over your farms. Remember the purpose of dscpfarms is to share
dscp
> > resources. Every voice card takes up different numbers. Also the more
farms
> > you have, the lesser the dscp resource left. If you can, remove a voice
card
> > you have installed then see if the number increase.
> >
> > Let us know your findings.
> >
> > Babatunde Sanda B.Sc (Acct.) CCNP, CCVP, CCNA(R,S,V), MCSA, N+, A+.
> > :: Sent from my Iphone. Apologies for errors and brevity. ::
> >
> > On Feb 4, 2011, at 8:43 PM, Tortle Tang <tortletang_at_hotmail.com> wrote:
> >
> > > 2811 support the following cmd and 2801 doesn't. Howerver , after
trying
> > the
> > > cmds in 2811, the max sesscion in conference still is 0. (2xPVDM16)
> > >
> > > voice-card 0
> > > dspfarm
> > > dsp services dspfarm
> > >
> > >
> > > Thanks,
> > > Tortle
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > From: tortletang_at_hotmail.com
> > > To: carl.gosselin_at_altizone.com
> > > CC: ccielab_at_groupstudy.com
> > > Subject: RE: PVDM2 in voice lab
> > > Date: Sat, 5 Feb 2011 15:29:11 +1100
> > >
> > >
> > >
> > >
> > > I tried, it doesn't work.
> > >
> > > voice-card 0
> > > dspfarm----this command isn't supported.
> > > dsp services dspfarm
> > >
> > >
> > >
> > > Thanks,
> > > Tortle
> > >
> > >
> > >
> > >
> > >> Date: Fri, 4 Feb 2011 22:20:48 -0500
> > >> Subject: Re: PVDM2 in voice lab
> > >> From: carl.gosselin_at_altizone.com
> > >> To: tortletang_at_hotmail.com
> > >> CC: ccielab_at_groupstudy.com
> > >>
> > >> Try this...
> > >>
> > >> !
> > >> voice-card 0
> > >> dspfarm
> > >> dsp services dspfarm
> > >> !
> > >>
> > >> /Carl
> > >>
> > >> On Fri, Feb 4, 2011 at 10:14 PM, Tortle Tang <tortletang_at_hotmail.com>
> > > wrote:
> > >>
> > >>> Hi Guys
> > >>>
> > >>> I have 2xPVDM2-16 in 2 slots, but when I configure " dspfarm profile
1
> > >>> conference", The max session is only 0. If I replace 2xPVDM2-16 with
> > >>> 1xPVDM2
> > >>> 48, I won't have any problem.
> > >>>
> > >>> Any idea ?
> > >>>
> > >>>
> > >>> R2#sh diag | in PVDM
> > >>> PVDM Slot 0:
> > >>> 16-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
> > >>> Product (FRU) Number : PVDM2-16
> > >>> PVDM Slot 1:
> > >>> 16-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
> > >>> Product (FRU) Number : PVDM2-16
> > >>>
> > >>>
> > >>> voice-card 0
> > >>> dsp services dspfarm
> > >>>
> > >>> R2(config)#dspfarm profile 1 conference
> > >>> R2(config-dspfarm-profile)#max
> > >>> R2(config-dspfarm-profile)#maximum se
> > >>> R2(config-dspfarm-profile)#maximum sessions ?
> > >>> <0-0> Number of sessions assigned to this profile
> > >>>
> > >>> Thanks,
> > >>>
> > >>>
> > >>> Blogs and organic groups at http://www.ccie.net
> > >>>
> > >>>
Received on Sun Feb 06 2011 - 08:05:26 ART