Re: Help Troubleshooting MSDP

>...any better commands or ways to learn?

My personal favorite is:

'capture R1 s0/0 example.cap HDLC'

Of course that's a Dynamips command vs. an actual IOS command. ;-)

____________________________________________
There are only 10 types of people in the world:
Those who understand binary and those who do not...

On Jan 29, 2011, at 10:25 , ALL From_NJ wrote:

> Hello Team,
>
> I have configured MSDP and two different RPs, pinged between them
> etc...
>
> Most of the time, each MSDP peer will update the other and I will see
> something in the sa-cache. Not always ... but most of the time.
> Sometimes
> pings fail too and I check the basics:
>
> - Can everyone reach the RP
> - Is PIM enabled end to end
> - Are there any alternate paths that the traffic could be traveling
>
> Any who ... back to the point of this email. Questions for the group:
>
> 1) what are the best commands for troubleshooting msdp? I use the:
>
> sho ip msdp sa
> sho ip msdp peer
>
> I also use the debug "debug ip msdp detail"
>
> Frankly, I am not learning much from these commands ... any better
> commands
> or ways to learn?
>
> 2) I ping from a local router and the ping is successful. How to
> watch
> this or see the MSDP messaging encapsulating / decapsulating?
>
> Any comments on which labs might help me the best? Thanks team and
> have a
> good night!!!
>
> --
> Andrew Lee Lissitz
> all.from.nj_at_gmail.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Jan 30 2011 - 16:39:23 ART