RE: ATM-AToM

Dear Marko,
 
I don't have a clear point about it,but i think if we can create Interface VLan and do something like IRB between the end and do something like IP SLA to Track the Link and if its down try to tear down the interface.
 
For your solution,how can PPPOE help me over the PVC as this will Require PPP Authentication and these issues between PE and CE side,however we have CE is not able to be configured with this and if it's ok and they will give us the ability to do that,
 
how PPPOE with Keepalives will shut down or close The Layer 2 VPN Interface at PE Side?Can you explain it More?
 
Thanks,
Mohamed Osama
 

 
> From: markom_at_ipexpert.com
> Date: Sun, 16 Jan 2011 11:29:05 +0000
> Subject: Re: ATM-AToM
> To: tetoo_me_at_hotmail.com
> CC: tscott_at_ipexpert.com; dcp_at_dcptech.com; ccielab_at_groupstudy.com
>
> How would another VLAN/PVC help you monitor the other one?
>
> --
> Marko Milivojevic - CCIE #18427
> Senior Technical Instructor - IPexpert
>
> FREE CCIE training: http://bit.ly/vLecture
>
> Mailto: markom_at_ipexpert.com
> Telephone: +1.810.326.1444
> Web: http://www.ipexpert.com/
>
> 2011/1/16 Mohamed Osama <tetoo_me_at_hotmail.com>:
> > Dear Marko,
> >
> > I have Another Thing i want you to clarify it,Is it possible to create
> > another Subinterface on The PE Ethernet Interface with a layer 3B IP and
> > Create Another PVC from DSLAM toB CE with Layer 3 Information,To Monitor The
> > Physical LinkB BetweenB PE and CE?IS that Possible Solution to Create a layer
> > 3 link to monitor The Other PVC Circuit?
> > i'm Concering about the Physical link status.
> >
> > Thanks in advcance,
> > Mohamed Osama
> >
> >> From: markom_at_ipexpert.com
> >> Date: Sun, 16 Jan 2011 11:18:00 +0000
> >> Subject: Re: ATM-AToM
> >> To: tetoo_me_at_hotmail.com
> >> CC: tscott_at_ipexpert.com; dcp_at_dcptech.com; ccielab_at_groupstudy.com
> >>
> >> 2011/1/16 Mohamed Osama <tetoo_me_at_hotmail.com>:
> >> > DearB Marko,
> >> >
> >> > Thanks For Your Information,Unfortunatily I have Ethernet DSLAM :(
> >> >
> >> > I hope if anyone have an alternative solution to help me with it.
> >>
> >> Unless you have network and DSLAM that support Ethernet OAM, the only
> >> viable solution is to use PPPoE with keepalives. Other than that...
> >> pray it works ;-)
> >>
> >> --
> >> Marko Milivojevic - CCIE #18427
> >> Senior Technical Instructor - IPexpert
> >>
> >> FREE CCIE training: http://bit.ly/vLecture
> >>
> >> Mailto: markom_at_ipexpert.com
> >> Telephone: +1.810.326.1444
> >> Web: http://www.ipexpert.com/
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Jan 16 2011 - 13:46:40 ART