RE: ATM-AToM

Dear Marko,
 
Thanks For Your Information,Unfortunatily I have Ethernet DSLAM :(
 
I hope if anyone have an alternative solution to help me with it.
 
 
BR,
Mohamed
 
> From: markom_at_ipexpert.com
> Date: Sun, 16 Jan 2011 10:42:24 +0000
> Subject: Re: ATM-AToM
> To: tetoo_me_at_hotmail.com
> CC: tscott_at_ipexpert.com; dcp_at_dcptech.com; ccielab_at_groupstudy.com
>
> Mohamed,
>
> If you have Ethernet DSLAM, ATM OAM will not work. If you have ATM
> DSLAM, the ATM OAM feature will work.
>
> --
> Marko Milivojevic - CCIE #18427
> Senior Technical Instructor - IPexpert
>
> FREE CCIE training: http://bit.ly/vLecture
>
> Mailto: markom_at_ipexpert.com
> Telephone: +1.810.326.1444
> Web: http://www.ipexpert.com/
>
> On Sun, Jan 16, 2011 at 10:33, Mohamed Osama <tetoo_me_at_hotmail.com> wrote:
> > Dear Tyson,
> >
> > I have a doubt about some issue : wouldn't you think that the IP-DSLAM would terminate the OAM LOOpback Messages at the Ethernet Uplink port TO the PE Router?
> >
> > I hope to give me a solution for this Issue as The DSLAM Connected To ATM through the Customer and Ethernet Link To The PE Router,this is why we have a Problem as We before we migrate from ATM DSLAM to IP DSLAM,there wasn't any problem.
> >
> >
> >
> > ThANKS,
> > Osama
> >
> >> From: tscott_at_ipexpert.com
> >> To: tetoo_me_at_hotmail.com; dcp_at_dcptech.com; ccielab_at_groupstudy.com
> >> Subject: RE: ATM-AToM
> >> Date: Thu, 13 Jan 2011 12:12:53 -0500
> >>
> >> You are trying to perform the role of the CE in this. The CE needs to do
> >> OAM between CE locations and make routing decisions based on the best path,
> >> This is not the role of the provider in this scenario to decide how to
> >> forward traffic over the two paths. That is the role of the customer.
> >>
> >>
> >>
> >> Regards,
> >>
> >>
> >>
> >> Tyson Scott - CCIE #13513 R&S, Security, and SP
> >> Managing Partner / Sr. Instructor - IPexpert, Inc.
> >> Mailto: tscott_at_ipexpert.com
> >>
> >>
> >>
> >>
> >>
> >> From: Mohamed Osama [mailto:tetoo_me_at_hotmail.com]
> >> Sent: Thursday, January 13, 2011 11:56 AM
> >> To: dcp_at_dcptech.com; tscott_at_ipexpert.com; Cisco certification
> >> Subject: RE: ATM-AToM
> >>
> >>
> >>
> >> Dear All,
> >>
> >>
> >>
> >> Yes thats True and CE want Us To Provide Him with Another Layer 2 circuit so
> >> that in this case CE will be Connected to our PE1 with 2 Layer 2 Circuits on
> >> Separate 2 ATM interfaces on PE1 router and For Sure our PE1 will have
> >> xconnect to the other End PE2.
> >>
> >>
> >>
> >> In My scenario,I'm talking about the Layer 2 circuit,How I can Detect if the
> >> ATM Layer 2 Circuit between PE and CE is UP or Down,
> >>
> >> and if it's Down,how can i provision the Other Layer 2 Circuit to be used
> >> For AToM Layer 2 VPN,and if both up how load balance and load sharing will
> >> be down.
> >>
> >>
> >>
> >> Its similar to the case when having 2 static Route under VRF with Tracking
> >> IP SLA but this for LAyer 3 customer which is Using Routing not LAyer 2 vpn
> >> :) ---------- I said this as an example Just to clear my point :D
> >>
> >>
> >>
> >> Thanks,
> >>
> >> Osama
> >>
> >> > From: dcp_at_dcptech.com
> >> > To: tetoo_me_at_hotmail.com; tscott_at_ipexpert.com; ccielab_at_groupstudy.com
> >> > Subject: RE: ATM-AToM
> >> > Date: Thu, 13 Jan 2011 11:38:54 -0500
> >> >
> >> > AToM requires the PE's to have L3 connectivity. The PE/CE connection is
> >> L2.
> >> > On the PE ATM interface you will have "xconnect 1.1.1.1 100 encap mpls"
> >> > where 1.1.1.1 is the loopback on the other PE.
> >> >
> >> > David
> >> >
> >> > --
> >> > http://dcp.dcptech.com
> >> >
> >> >
> >> > > -----Original Message-----
> >> > > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> >> > > Mohamed Osama
> >> > > Sent: Thursday, January 13, 2011 11:02 AM
> >> > > To: tscott_at_ipexpert.com; Cisco certification
> >> > > Subject: RE: ATM-AToM
> >> > >
> >> > > Dear Tyson,
> >> > > what if there is no layer 3 information between PE Router and the
> >> > > customer Router,only layer 2 ATM circuit and we are offering them 2
> >> > > Layer 2 AToM circuit for redundancy.
> >> > > How can i do that??beside i can't do any changes at the Customer
> >> > > Router.
> >> > > I appreciate helping me in this case.
> >> > > Thanks,Osama
> >> > >
> >> > > > From: tscott_at_ipexpert.com
> >> > > > To: tetoo_me_at_hotmail.com; ccielab_at_groupstudy.com
> >> > > > Subject: RE: ATM-AToM
> >> > > > Date: Thu, 13 Jan 2011 10:26:02 -0500
> >> > > >
> >> > > > If the OAM loopback responses are lost then the PVC goes down which
> >> > > will
> >> > > > force the traffic in the other direction. I am under the presumption
> >> > > you
> >> > > > have some L3 traffic running across the connection. Simply routing
> >> > > of the
> >> > > > connection between the sites should do. I am under the hope that you
> >> > > > designed this terminating the AToM with Loopbacks as the
> >> > > source/destination
> >> > > > allowing simply routing protocol path preference to decide the path
> >> > > to take.
> >> > > >
> >> > > >
> >> > > >
> >> > > > Regards,
> >> > > >
> >> > > >
> >> > > >
> >> > > > Tyson Scott - CCIE #13513 R&S, Security, and SP
> >> > > > Managing Partner / Sr. Instructor - IPexpert, Inc.
> >> > > > Mailto: tscott_at_ipexpert.com
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > > > From: Mohamed Osama [mailto:tetoo_me_at_hotmail.com]
> >> > > > Sent: Thursday, January 13, 2011 10:20 AM
> >> > > > To: tscott_at_ipexpert.com; Cisco certification
> >> > > > Subject: RE: ATM-AToM
> >> > > >
> >> > > >
> >> > > >
> >> > > > Dear Tyson,
> >> > > >
> >> > > >
> >> > > >
> >> > > > Thanks For Your Valuable Information,
> >> > > >
> >> > > > But How can i use It To monitor and Manage The Customer Layer 2 VPN
> >> > > Circuit,
> >> > > >
> >> > > > so that if The First AToM layer 2 VPN circuit can Detect its Down,
> >> > > >
> >> > > >
> >> > > >
> >> > > > then Can Utilize The Other Layer 2 VPN Link To be Active In The Layer
> >> > > 2
> >> > > > AToM?
> >> > > >
> >> > > >
> >> > > >
> >> > > > Any Advices About This?what configurations should be applied to the
> >> > > Router
> >> > > > to Solve that?
> >> > > >
> >> > > >
> >> > > >
> >> > > > I appreciate Your Response
> >> > > >
> >> > > >
> >> > > >
> >> > > > Thanks,
> >> > > >
> >> > > > Osama
> >> > > >
> >> > > > > From: tscott_at_ipexpert.com
> >> > > > > To: tetoo_me_at_hotmail.com; ccielab_at_groupstudy.com
> >> > > > > Subject: RE: ATM-AToM
> >> > > > > Date: Thu, 13 Jan 2011 09:22:34 -0500
> >> > > > >
> >> > > > > It is called OAM management.
> >> > > > >
> >> > > >
> >> > > http://www.cisco.com/en/US/tech/tk39/tk51/technologies_q_and_a_item0918
> >> > > 6a008
> >> > > > > 0111154.shtml
> >> > > > >
> >> > > > >
> >> > > > > Regards,
> >> > > > >
> >> > > > > Tyson Scott - CCIE #13513 R&S, Security, and SP
> >> > > > > Managing Partner / Sr. Instructor - IPexpert, Inc.
> >> > > > > Mailto: tscott_at_ipexpert.com
> >> > > > >
> >> > > > >
> >> > > > > -----Original Message-----
> >> > > > > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On
> >> > > Behalf Of
> >> > > > > Mohamed Osama
> >> > > > > Sent: Thursday, January 13, 2011 6:49 AM
> >> > > > > To: Cisco certification
> >> > > > > Subject: ATM-AToM
> >> > > > >
> >> > > > > Dear Experts,
> >> > > > >
> >> > > > > Can you please help me with this issue :)
> >> > > > >
> >> > > > > I need to monitor the status of Layer 2 Circuit Carrying ATom-
> >> > > ATM,because
> >> > > > > the Customer is connected with two layer 2 links through ATM/DSLAM
> >> > > to our
> >> > > > PE
> >> > > > > Router.
> >> > > > > I need to find a way so that i can monitor the Status of Layer 2
> >> > > LINK
> >> > > > > carring AToM to Be able to Utlize the Primary link and Backup Link.
> >> > > > >
> >> > > > > CPE------two Links-----ATM DSLAM---------Two Links-------PE
> >> > > > >
> >> > > > > Kindly notes i can't monitor the Status of Interfaces because the
> >> > > DSLAM
> >> > > > > doesnt provide it and we need to check layer 2 end to end.
> >> > > > >
> >> > > > > Any Mechanism To Provide that Solution?
> >> > > > >
> >> > > > > thanks,
> >> > > > > Osama
> >> > > > >
> >> > > > >
> >> > > > > Blogs and organic groups at http://www.ccie.net
> >> > > > >
> >> > > > >
> >> > > _______________________________________________________________________
> >> > > > > Subscription information may be found at:
> >> > > > > http://www.groupstudy.com/list/CCIELab.html
> >> > > >
> >> > > >
> >> > > > Blogs and organic groups at http://www.ccie.net
> >> > > >
> >> > > >
> >> > > _______________________________________________________________________
> >> > > > Subscription information may be found at:
> >> > > > http://www.groupstudy.com/list/CCIELab.html
> >> > >
> >> > >
> >> > > Blogs and organic groups at http://www.ccie.net
> >> > >
> >> > > _______________________________________________________________________
> >> > > Subscription information may be found at:
> >> > > http://www.groupstudy.com/list/CCIELab.html
> >> >
> >> >
> >> > Blogs and organic groups at http://www.ccie.net
> >> >
> >> > _______________________________________________________________________
> >> > Subscription information may be found at:
> >> > http://www.groupstudy.com/list/CCIELab.html
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Jan 16 2011 - 13:06:53 ART