RE: CUCM

Asim,

You could do it with a translation pattern in CUCM or with a translation profile at your CUBE. On CUCM it would be something like ! with a mask of XXXX. On CUBE it would be something similar to this:

voice translation-rule 414
 rule 1 /^414\(....\)/ /\1/
!
voice translation-profile inbound-translation
 translate called 414
!

Which would be applied at the inbound SIP dial-peer.

-ryan

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Asim Zafar
Sent: Monday, December 27, 2010 9:00 AM
To: Cisco certification
Subject: CUCM

Dear Experts,

I have a situation, I have a setup of CUCM with sip trunk to the provider.

for CUCM the sip server is the router with cube and from router the calls are forwarding towards sip server.

when someone calls to an number from outside e.g. 4147111 it transfers to the extension if it have configured with full number but my requirement is to configure the ext with 7111 only. When I configured it will 7111 the call don't transferred to the phone.

--
Thanks & Regards,
Asim Zafar
Blogs and organic groups at http://www.ccie.net