Re: CUCM

well an easy and lazy way would be just this

config t
num-exp 4147111 7111
exit

:)

On Tue, Dec 28, 2010 at 1:08 AM, Ryan West <rwest_at_zyedge.com> wrote:

> Asim,
>
> You could do it with a translation pattern in CUCM or with a translation
> profile at your CUBE. On CUCM it would be something like ! with a mask of
> XXXX. On CUBE it would be something similar to this:
>
> voice translation-rule 414
> rule 1 /^414\(....\)/ /\1/
> !
> voice translation-profile inbound-translation
> translate called 414
> !
>
> Which would be applied at the inbound SIP dial-peer.
>
> -ryan
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Asim Zafar
> Sent: Monday, December 27, 2010 9:00 AM
> To: Cisco certification
> Subject: CUCM
>
> Dear Experts,
>
>
> I have a situation, I have a setup of CUCM with sip trunk to the provider.
>
> for CUCM the sip server is the router with cube and from router the calls
> are forwarding towards sip server.
>
> when someone calls to an number from outside e.g. 4147111 it transfers to
> the extension if it have configured with full number but my requirement is
> to configure the ext with 7111 only. When I configured it will 7111 the call
> don't transferred to the phone.
>
> --
> Thanks & Regards,
>
> Asim Zafar
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Dec 28 2010 - 19:16:48 ART