RE: Cisco 7941(SCCP) dialing out only signle digit

show dial-peer voice sum | e \$ should show the dial-peers you created. You
can do a show dial-peer voice sum to show all of them, but CME generated ones
should be in the format of DN followed by $.

I guess I forgot to ask, is this happening with just that phone? Do you have
any corlists configured?

-ryan

From: Asim Riaz [mailto:ariaz78_at_gmail.com]
Sent: Tuesday, December 21, 2010 10:10 AM
To: Ryan West
Cc: Mohammed Aftab Memon; Cisco certification
Subject: Re: Cisco 7941(SCCP) dialing out only signle digit

i ran the debug command and looks like phone is only dialing 3 even i dialed
3006, i dont know what is wrong but looks like digit timeout or something, any
idea ?

ec 21 15:18:19.383: //498/5FFA1D83809D/CCAPI/cc_api_display_ie_subfields:
   ccCallSetupRequest:
   cisco-username=
   ----- ccCallInfo IE subfields -----
   cisco-ani=3005
   cisco-anitype=0
   cisco-aniplan=0
   cisco-anipi=0
   cisco-anisi=0
   dest=3
   cisco-desttype=0
   cisco-destplan=0
   cisco-rdie=FFFFFFFF
   cisco-rdn=
   cisco-lastrdn=
   cisco-rdntype=0
   cisco-rdnplan=0
   cisco-rdnpi=0
   cisco-rdnsi=0
   cisco-redirectreason=0 fwd_final_type =0
   final_redirectNumber =
   hunt_group_timeout =0

*Dec 21 15:18:19.383: //498/5FFA1D83809D/CCAPI/ccIFCallSetupRequestPrivate:
   Interface=0x662F1B1C, Interface Type=3, Destination=, Mode=0x0,
   Call Params(Calling Number=3005,(Calling Name=3005)(TON=Unknown,
NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
   Called Number=3(TON=Unknown, NPI=Unknown), Calling Translated=FALSE
Thanks,

Asim
On Tue, Dec 21, 2010 at 1:52 PM, Ryan West
<rwest_at_zyedge.com<mailto:rwest_at_zyedge.com>> wrote:
If you think your dial peers are configured correctly, try deb voip ccapi
inout. Either way, it will show which dial peer is being matched.

Sent from handheld

On Dec 21, 2010, at 8:37 AM, Mohammed Aftab Memon
<aftabmemon12_at_gmail.com<mailto:aftabmemon12_at_gmail.com>> wrote:
t
> Check for that extension under Route Plan Report.
>
> It might give you the list if something is configured. Might be there is
> some pattern designed for this.
>
>
>
>
> On Tue, Dec 21, 2010 at 6:37 PM, Asim Riaz
<ariaz78_at_gmail.com<mailto:ariaz78_at_gmail.com>> wrote:
>
>> Hi All,
>> I have phone registed with CME but when i dial out from phone its just
dial
>> only signle digit, means if i am dialing to another extention wich is 3006
>> it dials only 3 , any idea ?
>>
>> Thanks in advance
>>
>> Asim
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Dec 21 2010 - 15:22:30 ART