Re: MPLS Problem

Hi,

Which prefix you are pinging from R4?
For this prefix, could you provide following output?

On R1: show ip cef vrf <VRF name> <prefix> detail
On R3: show ip bgp vpnv4 vrf <VRF name> <prefix> detail

Thanks,
Srinivas

On Mon, Dec 20, 2010 at 1:47 PM, HEMANTH RAJ <hemanthrj_at_gmail.com> wrote:

> Hey This is my topoogy
>
>
> R1--------------------------R2-----------------------------R3
> | |
> | |
> | |
> R4 R5
>
>
> R1 an R3 is my PE and R4 and R5 are my customers I am forming MPBGP between
> R1 and R3 and all routes are exchanged between R4 and R5
> and all my imports r working fine
> but i am getting this following error
>
> %BGP-4-VPNV4NH_MASK: Nexthop 3.3.3.3 may not be reachable from neigbor
> 1.1.1.1 -^ not /32 mask
>
> but all my ldp neighbourships are up
> and i had done sh ip mpls ldp discovery det
> everythin is fine i can able to ping my transport address
> All the routes of R5 are in R4 and R1 routing table
>
> but R4 cannot ping R4 and also R1 cannot ping R5
>
> Pls anyone help
>
>
> --
> Problems arise because we talk,problems are not solved because we don't
> talk
> So good or bad talk to your affectionate one's freely.
>
> Yours Friendly,
> HP HEMANTH RAJ
> Cisco Systems Inc.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Dec 20 2010 - 14:17:32 ART