Re: OT: span on 4900m

Thanks a lot for your help Tyson again - I will def try this out tomorrow
and advise.

On Mon, Dec 13, 2010 at 7:28 PM, Tyson Scott <tscott_at_ipexpert.com> wrote:

> Even this facebook posting says it is supported on the 4900. And the
> command structure on the 4500 and 4900 are also the same and I know the
> 4500
> also supports the VACL capture feature.
>
> http://www.facebook.com/note.php?note_id=42536367441
>
> Regards,
>
> Tyson Scott - CCIE #13513 R&S, Security, and SP
> Managing Partner / Sr. Instructor - IPexpert, Inc.
> Mailto: tscott_at_ipexpert.com
> Telephone: +1.810.326.1444, ext. 208
>
>
> -----Original Message-----
> From: Anthony Bonilla [mailto:anthonybonilla.ccie_at_gmail.com]
> Sent: Monday, December 13, 2010 6:32 PM
> To: Tyson Scott
> Cc: Brad Edgeworth; ccielab_at_groupstudy.com
> Subject: Re: OT: span on 4900m
>
> Anyone else has an idea?
>
> On Friday, December 10, 2010, Anthony Bonilla
> <anthonybonilla.ccie_at_gmail.com> wrote:
> > Guys,
> >
> > Thx a lot for your suggestions but looks like that 4900m does not
> > allow option to configure VCAL - anyone has done it or any other
> > option?
> >
> > Tony
> >
> > On Friday, December 10, 2010, Tyson Scott <tscott_at_ipexpert.com> wrote:
> >> There is no limit with the VACL Capture feature.
> >>
> >>
>
> http://www.cisco.com/en/US/tech/tk389/tk814/technologies_configuration_examp
> >> le09186a00808122ac.shtml
> >>
> >>
> >> Regards,
> >>
> >> Tyson Scott - CCIE #13513 R&S, Security, and SP
> >> Managing Partner / Sr. Instructor - IPexpert, Inc.
> >> Mailto: tscott_at_ipexpert.com
> >>
> >>
> >> -----Original Message-----
> >> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> >> Anthony Bonilla
> >> Sent: Friday, December 10, 2010 10:19 AM
> >> To: Brad Edgeworth
> >> Cc: ccielab_at_groupstudy.com
> >> Subject: Re: OT: span on 4900m
> >>
> >> Brad,
> >>
> >> Can you pls elaborate how VACLs would help?
> >>
> >> On Friday, December 10, 2010, Brad Edgeworth <edgie512_at_gmail.com>
> wrote:
> >>> What about using a VACL
> >>> On Dec 10, 2010 6:46 AM, "Anthony Bonilla"
> <anthonybonilla.ccie_at_gmail.com>
> >> wrote:> Team,
> >>>>
> >>>> Sorry for OT but I need some advice urgently- I have a remote site
> >>>> where I need to send traffic to a security device (2 interfaces) in
> >>>> addition to monitoring device (again with 2 interfaces). As you
> >>>> always must be aware that I can only have two SPAN sessions, which
> >>>> would work if I were able to send data to all 4 port (1 port on each
> >>>> device requires to see same data). I can't have two dest ports on a
> >>>> span and also thought of creating two VLANs but 4900 does not allow
> >>>> that as an option for dest port. RSPAN is not an option because I
> >>>> only have one L3 switch - I wanted to see if anyone has run into this
> >>>> issue and what can be my options short of buying some fancy tap.
> >>>> Please HELP!
> >>>>
> >>>>
> >>>> Blogs and organic groups at http://www.ccie.net
> >>>>
> >>>>
> _______________________________________________________________________
> >>>> Subscription information may be found at:
> >>>> http://www.groupstudy.com/list/CCIELab.html
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Dec 13 2010 - 23:37:24 ART