Re: OT: span on 4900m

Sorry for delayed reply but capture option does not exist on 4900M.

On Monday, December 13, 2010, Anthony Bonilla
<anthonybonilla.ccie_at_gmail.com> wrote:
> Thanks a lot for your help Tyson again - I will def try this out tomorrow and advise.
>
> On Mon, Dec 13, 2010 at 7:28 PM, Tyson Scott <tscott_at_ipexpert.com> wrote:
> Even this facebook posting says it is supported on the 4900. And the
> command structure on the 4500 and 4900 are also the same and I know the 4500
> also supports the VACL capture feature.
>
> http://www.facebook.com/note.php?note_id=42536367441
>
> Regards,
>
> Tyson Scott - CCIE #13513 R&S, Security, and SP
> Managing Partner / Sr. Instructor - IPexpert, Inc.
> Mailto: tscott_at_ipexpert.com
>
> Telephone: +1.810.326.1444, ext. 208
>
>
> -----Original Message-----
> From: Anthony Bonilla [mailto:anthonybonilla.ccie_at_gmail.com]
> Sent: Monday, December 13, 2010 6:32 PM
> To: Tyson Scott
>
>
>
> Cc: Brad Edgeworth; ccielab_at_groupstudy.com
> Subject: Re: OT: span on 4900m
>
> Anyone else has an idea?
>
> On Friday, December 10, 2010, Anthony Bonilla
> <anthonybonilla.ccie_at_gmail.com> wrote:
>> Guys,
>>
>> Thx a lot for your suggestions but looks like that 4900m does not
>> allow option to configure VCAL - anyone has done it or any other
>> option?
>>
>> Tony
>>
>> On Friday, December 10, 2010, Tyson Scott <tscott_at_ipexpert.com> wrote:
>>> There is no limit with the VACL Capture feature.
>>>
>>>
> http://www.cisco.com/en/US/tech/tk389/tk814/technologies_configuration_examp
>>> le09186a00808122ac.shtml
>>>
>>>
>>> Regards,
>>>
>>> Tyson Scott - CCIE #13513 R&S, Security, and SP
>>> Managing Partner / Sr. Instructor - IPexpert, Inc.
>>> Mailto: tscott_at_ipexpert.com
>>>
>>>
>>> -----Original Message-----
>>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>>> Anthony Bonilla
>>> Sent: Friday, December 10, 2010 10:19 AM
>>> To: Brad Edgeworth
>>> Cc: ccielab_at_groupstudy.com
>>> Subject: Re: OT: span on 4900m
>>>
>>> Brad,
>>>
>>> Can you pls elaborate how VACLs would help?
>>>
>>> On Friday, December 10, 2010, Brad Edgeworth <edgie512_at_gmail.com> wrote:
>>>> What about using a VACL
>>>> On Dec 10, 2010 6:46 AM, "Anthony Bonilla"
> <anthonybonilla.ccie_at_gmail.com>
>>> wrote:> Team,
>>>>>
>>>>> Sorry for OT but I need some advice urgently- I have a remote site
>>>>> where I need to send traffic to a security device (2 interfaces) in
>>>>> addition to monitoring device (again with 2 interfaces). As you
>>>>> always must be aware that I can only have two SPAN sessions, which
>>>>> would work if I were able to send data to all 4 port (1 port on each
>>>>> device requires to see same data). I can't have two dest ports on a
>>>>> span and also thought of creating two VLANs but 4900 does not allow
>>>>> that as an option for dest port. RSPAN is not an option because I
>>>>> only have one L3 switch - I wanted to see if anyone has run into this
>>>>> issue and what can be my options short of buying some fancy tap.
>>>>> Please HELP!
>>>>>
>>>>>
>>>>> Blogs and organic groups at http://www.ccie.net <http://www.ccie.net/>

Blogs and organic groups at http://www.ccie.net
Received on Wed Dec 15 2010 - 12:21:24 ART