Re: FULL Status LMI request interval change......

Please refer to Documentation . Diff codes have different usage .

For example :

frame-relay lmi-n392dte : To set the error threshold on a data
terminal equipment (DTE)

Thnx
Gaurav Madan
CCIE

On Mon, Dec 6, 2010 at 12:34 PM, Nadeem Rafi <nrafia_at_gmail.com> wrote:
> Thanks Mada for your valued input.. but why not lmi-n392/393dte? why 391?
>
> On Mon, Dec 6, 2010 at 10:00 AM, GAURAV MADAN <gauravmadan1177_at_gmail.com>
> wrote:
>>
>> Has to be a DTE command .
>>
>> Check this :
>>
>> rame-relay lmi-n391dte
>>
>> To set a full status polling interval, use the frame-relay lmi-n391dte
>> interface configuration command. To restore the default interval
>> value, assuming that a Local Management Interface (LMI) has been
>> configured, use the no form of this command.
>>
>> frame-relay lmi-n391dte keep-exchanges
>>
>> no frame-relay lmi-n391dte keep-exchanges
>> Syntax Description
>>
>> keep-exchanges
>>
>>
>> Number of keep exchanges to be done before requesting a full status
>> message. Acceptable value is a positive integer in the range from 1
>> through 255.
>>
>> Defaults
>>
>> 6 keep exchanges
>>
>> So now u have a hint
>>
>> Thnx
>> Gaurav Madan
>>
>> On Mon, Dec 6, 2010 at 12:27 PM, Nadeem Rafi <nrafia_at_gmail.com> wrote:
>> > Hi GS,
>> > Some very basic question about frame-relay. A task asked me to change
>> > full
>> > status LMI request interval to half of original values. Interface showed
>> > me
>> > that i m using Annex D type LMI
>> >
>> > R1(config-if)#do sh int s0/0 | inc LMI type
>> > LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE segmentation
>> > inactive
>> >
>> > ok good to see but what i should select from the given below to adjust
>> > event? cannot find any hint on google.
>> >
>> > R1(config-if)#frame-relay lmi-?
>> > lmi-n391dte lmi-n392dce lmi-n392dte lmi-n393dce
>> > lmi-n393dte lmi-t392dce lmi-type
>> >
>> > Any help will be highly appreciated.
>> >
>> >
>> > Best Regards,
>> >
>> > Nadeem Rafi
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Dec 06 2010 - 12:48:56 ART