Re: OT: Can I NAT one private ip address to two global (public)

On a router, you can use a route-map to accomplish this. More here:

http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iadnat_addr_consv_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1073518

Let us know how you get on please.

HTH
Sadiq

On Wed, Dec 1, 2010 at 11:37 AM, Solomon Awosina <solomonawosina_at_yahoo.co.uk
> wrote:

> It is on a router
>
> Sent from Sholo's BlackBerry
> ------------------------------
> *From: * Sadiq Yakasai <sadiqtanko_at_gmail.com>
> *Date: *Wed, 1 Dec 2010 11:26:38 +0000
> *To: *Solomon Awosina<solomonawosina_at_gmail.com>
> *Cc: *Solomon Awosina<solomonawosina_at_yahoo.co.uk>; Cisco certification<
> ccielab_at_groupstudy.com>
> *Subject: *Re: OT: Can I NAT one private ip address to two global (public)
> ip addresses
>
> Why not.
>
> Create an ACL (that references the source and destinations) and peg this to
> the NAT statements.
>
> Is this on an IOS or ASA device?
>
> Sadiq
>
> On Wed, Dec 1, 2010 at 11:07 AM, Solomon Awosina <solomonawosina_at_gmail.com
> > wrote:
>
>> Hello People,
>>
>> Can I do a static nat of one inside (private) ip to two global (public) ip
>> on the router?
>>
>> If yes, how.
>>
>> For example, I have a server (ip is 10.2.3.6) and it needs to connect to
>> two different servers. For server 1, my ip must be translated to 55.1.3.6
>> while for server 2, it must be translated to 100.2.6.6.
>>
>> Is this possible?
>>
>> Thank you.
>> Sent from Sholo BlackBerry
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> CCIEx2 (R&S|Sec) #19963
>

-- 
CCIEx2 (R&S|Sec) #19963
Blogs and organic groups at http://www.ccie.net