Re: MPLS TE

Can you post your ISIS configs

CCIE # 23962 (SP)

Sent from my iPhone 4

On 02 Nov 2010, at 9:01 AM, Gaurav Thukral <pearlgaurav_at_gmail.com> wrote:

> Hi guys,
>
> I have three Routers connected in a Traingle Having routers names R7 R8 R9
> respectively.
>
> I have created Dynamic tunnel between R9 & R8 on their Loop2. ISIS is
> running as the IGP.
>
> under all the MPLS TE link i have configured the following command
>
> ip rsvp bandwidth 100000 50000 sub-pool 20000
>
> Means 100Mb , 50Mb(Flow) and subpool BW 20Mb & Tunnel should use 5Mb
> bandwidth.
>
>
> R8
>
> interface Tunnel89
> ip unnumbered Loopback2
> tunnel destination 5.5.99.9
> tunnel mode mpls traffic-eng
> tunnel mpls traffic-eng priority 7 7
> tunnel mpls traffic-eng bandwidth 5000
> tunnel mpls traffic-eng path-option 1 dynamic
>
> ip route 5.5.99.9 255.255.255.255 Tunnel89
>
> R9
>
> interface Tunnel98
> ip unnumbered Loopback2
> tunnel destination 5.5.88.8
> tunnel mode mpls traffic-eng
> tunnel mpls traffic-eng priority 7 7
> tunnel mpls traffic-eng bandwidth 5000
> tunnel mpls traffic-eng path-option 1 dynamic
>
> ip route 5.5.88.8 255.255.255.255 Tunnel98
>
> But my requirement is Tunnel should use BW from subpool.
> So under Tunnel interface if i use subpool BW Tuunel become down?
>
> Please Help me.
>
> Thanks in advance.
>
> Regards,
> gaurav
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Nov 02 2010 - 09:31:27 ART