Re: Passed the config, failed the TS, need your help guys.

I've found that even though "logging monitor" is supposed to limit only vty
lines messages, it has affected debug output on console too on some
devices.
I would've enabled logging monitor together with logging console.

Although this might not be your case!!!

Regards,

P.S. I'm really sorry for hearing you've failed TS part.

On Sun, Oct 24, 2010 at 3:43 AM, Artem Nedoshepa
<artem.nedoshepa_at_gmail.com>wrote:

> Hi guys,
>
> I just got my results, passed the config and failed the TS, still
> "shaking".
>
> I have a question: during the TS I had some issues with the debugging,
> basically I didn't see any debug output on the related devices. I double
> checked the "logging console", I made sure I was connected through the
> console, I turned on the right debugging. I reloaded related devices
> through
> the GUI, turned the debugging back on didn't help. That debugging issue had
> a huge impact on my performance and I'm positive that if it was working the
> result would be different. It happened somewhere in the middle of the TS
> and it really messed my brain.
>
> Is there is any chance that cisco's ccie support will listen to it?
>
>
> Thanks.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Oct 24 2010 - 09:06:42 ART