Re: DHCP Static binding

01 indicates Ethernet media type. Client-identifier is indeed required
for DHCP requests. Hardware-address is used for BOOTP.

On Mon, Sep 27, 2010 at 10:31 PM, Raghav Bhargava
<raghavbhargava12_at_gmail.com> wrote:
> Hey Andrey,
>
> yes i used 01 with the mac address.Also i used the client-identifier rather
> than hardware-address keyword and it worked. But can you please explain the
> significance of 01 as i was not able to understand it . That fixed my issue.
>
> -Raghav
>
> On Mon, Sep 27, 2010 at 9:52 PM, Andrey Tarasov <andyvt_at_gmail.com> wrote:
>>
>> Raghav,
>>
>> Make sure "01." is added at the beginning of client's MAC address -
>> i.e. 01.0001.2345.abcd
>>
>> Regards,
>> Andrey.
>>
>> On Mon, Sep 27, 2010 at 9:19 PM, Raghav Bhargava
>> <raghavbhargava12_at_gmail.com> wrote:
>> > Hey Experts,
>> >
>> > I have a query regarding DHCP static bindings. If i have a host
>> > connected to
>> > a switch and the switch is connected to the router. Now my router is
>> > serving
>> > as a dhcp server and i want that the host should not get the ip address
>> > dynamically but instead i create a dhcp pool and bind the host's mac
>> > with a
>> > specific ip ( static DHCP ).
>> >
>> > My query is what is the correct configuration for achieving this . below
>> > is
>> > a sample config on the router which i am using:
>> >
>> > ***********************************
>> > ip dhcp pool cisco
>> > network 1.1.1.0/24
>> > default-router 1.1.1.1
>> > dns-server primary secondary
>> > lease days hours
>> > !
>> > ip dhcp excluded-address 1.1.1.4 1.1.1.5
>> > !
>> > !
>> > ip dhcp pool static
>> > host 1.1.1.4 /24
>> > hardware-address x.x.x.x.x.x.x.x
>> >
>> > ***********************************
>> >
>> > The host is connected to the switch and the switch is connected to the
>> > router via a dot1q trunk. The configuration on the switch port on which
>> > the
>> > host is connected is simple access port config.
>> >
>> > Please advise if i am missing out on something coz if this is the
>> > correct
>> > config then it is not working in my scenario.
>> >
>> >
>> >
>> > --
>> > Warm Regards
>> > Raghav
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>
>
>
> --
> Warm Regards
> Raghav

Blogs and organic groups at http://www.ccie.net
Received on Mon Sep 27 2010 - 22:42:15 ART