Using the send-label command negates the use of using MPLS ip on the interface. Remember a lot of inter-as implementations won't allow you to run Ldp on the interfaces.
CCIE # 23962 (SP)
Sent from my iPhone 3GS
On 16 Sep 2010, at 6:36 PM, Edward John <edwardjohn2020_at_googlemail.com> wrote:
> Smith/Carlos,
>
> I enabled send-label. But I missed to check with "show mpls inter detail" whether BGP labelling is enabled..
> But Once I configure "mpls ip" in ASBR nni interface, everything started to work. I got this from the URL I mentioned earlier.
> I assumed that it is something to do with the code, coz normally I have seen if send-label is enabled (in direct peering) we cannot configure particular interface with mpls ip command. It will give an error. Here I didn't see that error..
>
> Regards,
> John
Blogs and organic groups at http://www.ccie.net
Received on Thu Sep 16 2010 - 18:47:56 ART
This archive was generated by hypermail 2.2.0 : Fri Oct 01 2010 - 05:58:05 ART