Re: I-AS simple testing

Did you enable the send-labels command under the BGP peering ?

CCIE # 23962 (SP)

On Thu, Sep 16, 2010 at 4:01 AM, Carlos Trujillo <
carlos.trujillo.jimenez_at_gmail.com> wrote:

> Try doing "show mpls interfaces". The interface connecting both asbrs will
> show you as an MPLS enabled interface, and if you are more specific and add
> a "detail" keywoard at the end of the command, it will show you that bgp
> labeling is enabled in that interface.
>
>
>
>
> 2010/9/11 Edward John <edwardjohn2020_at_googlemail.com>
>
> > Hi Nagen,
> >
> > Image is : 3640-jk9o3s-mz.123-14.T7.bin
> >
> > No, traffic doesn't pass, and I solved it by enabling mpls on the
> > interfaces.
> >
> > Following gives more info..
> >
> >
> >
> http://www.networkers-online.com/blog/2008/11/option-2-10b-asbr-to-asbr-multiprotocol-ebgp-mp-ebgp-for-vpnv4-inter-as-mpls-vpn-the-whole-story-3/
> >
> > Regards,
> > John
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Sep 16 2010 - 09:09:17 ART