Re: Frame-Relay related query

Well, you could use "ip unnumbered FastEthernet0/0", or any other
interface that has an IP address, since you are only disallowed from
using Loopback0's IP.

--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert
FREE CCIE training: http://bit.ly/vLecture
Mailto: markom_at_ipexpert.com
Telephone: +1.810.326.1444
Web: http://www.ipexpert.com/
On Thu, Sep 9, 2010 at 15:11, Muhammad Adeel <adeel2831_at_gmail.com> wrote:
> Hi,
>
> what could be the solution for this example:
>
> Connectivity:
>
> R1(s0/0) --------FRS------------ (s0/0)R2
>
> Example: Configure R1 and R2 according to the following requirements:
> B  B  Both should auto sense LMI type from FR switch
> B  B  Subinterface should be used as follows R1 S0/0.102 and for R2 S0/0.201
> B  B  DLCI for R1 is 102 and for R2 201,
>
> B  B  "DO NOT USE IP ADDRESS / IP UNNUMBERED LOOPBACK 0 FOR THIS
> COMMUNICATION".
>
>
> Regards,
>
>
> On Thu, Sep 9, 2010 at 6:21 PM, Tyson Scott <tscott_at_ipexpert.com> wrote:
>
>> You can use IPv6, you can use CLNS, you can use bridging, you can use L2
>> VPN, what is your goal? Your question is too vague.
>>
>> Regards,
>>
>> Tyson Scott - CCIE #13513 R&S, Security, and SP
>> Managing Partner / Sr. Instructor - IPexpert, Inc.
>> Mailto: tscott_at_ipexpert.com
>> Telephone: +1.810.326.1444, ext. 208
>> Live Assistance, Please visit: www.ipexpert.com/chat
>> eFax: +1.810.454.0130
>>
>> IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
>> Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
>> CCIE (R&S, Voice, Security & Service Provider) certification(s) with
>> training locations throughout the United States, Europe, South Asia and
>> Australia. Be sure to visit our online communities at
>> www.ipexpert.com/communities and our public website at www.ipexpert.com
>>
>>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>> Sonu
>> Khandelwal (sokhande)
>> Sent: Thursday, September 09, 2010 6:44 AM
>> To: Muhammad Adeel; Pornthep_CCIE
>> Cc: Cisco certification
>> Subject: RE: Frame-Relay related query
>>
>> You can atom (xconnect over frame-relay interface)
>> You can also do bridging.
>>
>> Thanks,
>> Sonu
>>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>> Muhammad Adeel
>> Sent: Thursday, September 09, 2010 3:34 PM
>> To: Pornthep_CCIE
>> Cc: Cisco certification
>> Subject: Re: Frame-Relay related query
>>
>> Hi,
>>
>> Thanks for your input. Actually, I am looking for a solution where we
>> can
>> not use the IP address also the IP unnumbered on physical and virtual
>> interface (sub-interfce, virtual-template, multilink). Is there any
>> other
>> way ?
>>
>>
>> On Thu, Sep 9, 2010 at 2:08 PM, Pornthep_CCIE
>> <pornthep.ccie_at_gmail.com>wrote:
>>
>> > Has one way to do it.
>> >
>> >
>> > interface Serial1/0
>> > B no ip address
>> > B encapsulation frame-relay
>> > B serial restart-delay 0
>> > B frame-relay interface-dlci 102 ppp Virtual-Template1
>> >
>> > interface Virtual-Template1
>> > B ip address 1.1.1.1 255.255.255.0
>> >
>> > and on interface Virtual-Template1, you can use ppp authen
>> [chap|pap|esp]
>> > to
>> > do authentication on this interface as well if you want.
>> >
>> >
>> > -----Original Message-----
>> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf
>> Of
>> > Muhammad Adeel
>> > Sent: Thursday, September 09, 2010 3:30 PM
>> > To: Cisco certification
>> > Subject: Frame-Relay related query
>> >
>> > Hi Experts,
>> >
>> >
>> >
>> > Is there any way to use frame-relay link without assigning IP on this
>> > interface/sub-interface and also without using unnumbered command.
>> >
>> >
>> >
>> > Regards,
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> >
>> _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net