Re: BGP - multihop & ttl security

Hi Bob,

below is the reachability info between loop back..

PE1#show ip route 10.1.1.100
Routing entry for 10.1.1.100/32
  Known via "isis", distance 115, metric 10, type level-2
  Redistributing via isis
  Last update from 172.16.111.2 on Serial2/0.100, 01:38:44 ago
  Routing Descriptor Blocks:
  * 172.16.111.2, from 10.1.1.100, via Serial2/0.100
      Route metric is 10, traffic share count is 1

PE1#ping 10.1.1.100 so lo 0 re 10

Type escape sequence to abort.
Sending 10, 100-byte ICMP Echos to 10.1.1.100, timeout is 2 seconds:
Packet sent with a source address of 10.1.1.1
!!!!!!!!!!
Success rate is 100 percent (10/10), round-trip min/avg/max = 4/26/64 ms

PE1#show ip bgp | include 10.1.1.100
* 0.0.0.0 10.1.1.100 0 100 200 i
* 101.101.101.0/24 10.1.1.100 0 0 100 i
* 172.16.111.0/24 10.1.1.100 0 0 100 i
* 172.16.113.0/24 10.1.1.100 0 100 200 i

Regards,
John

Blogs and organic groups at http://www.ccie.net
Received on Wed Sep 08 2010 - 02:38:41 ART