Re: Frame_relay Question

You don't have access to FR Switch .
Hence don't concentrate on a solution that you do on FR Switch .

On Mon, Sep 6, 2010 at 4:20 AM, Asif Vanoo <asif_at_vanoo.net> wrote:
> Hi
>
> The example is from Narbik with a little twist. Appreciate input from
> Experts.
> Its easy to resolve in real life scenario but in exam it could fix with one
> question.
>
>
> Issue : R1 cannot communicate with R2
> Solution : ( 1 ) : remove "Frame-relay lmi-type ansi" from FR_SW on in int
> s 0/0/0
> ((OR))
> (2) : add "Frame-relay lmi-type ansi on R1"
>
> If this was asked as troubleshooting question then whats the best answer.
>
>
> ---------------------------------------------------------------------------------------------------
> R1, R2, FR_SW
>
> **On FR_SW**
> encap frame-relay Switching
> int s0/0/0 -> connects to R1
> encap frame-relay
> frame_relay route 102 int se 0/0/1 201
> frame-relay intf-type dce
> frame-relay lmi-type ansi
>
> int s0/0/1
> encap frame-relay
> frame_relay route 201 int se 0/0/0 102
> frame-relay intf-type dce
> frame-relay lmi-type cisco
>
> ----------------------------------------------------------------------------------------------
> ** On R1**
> int se 0/0/0
> encap frame-relay
> no frame-relay inv arp
> ip address 10.1.100.1 255.255.255.252
> frame-relay interface-dlci 102
>
> ------------------------------------------------------------------------------------------------
> ** On R2**
> int se 0/0/0
> encap frame-relay
> no frame-relay inv arp
> ip address 10.1.100.2 255.255.255.252
> frame-relay interface-dlci 201
>
> ------------------------------------------------------------------------------------------------
>
> Thanks
> Asif
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Sep 06 2010 - 11:15:14 ART