Re: OT-Foundry Netiron problem-driving me crazy

Hi Prashant,
This beast is a little bit different compared to other foundry switches.
You can do OOB or inband management to switch.

For OOB:

enable
erase startup-config

config t
interface management 1
ip address 1.1.1.1 255.255.255.0
enable

then enable the telnet server

config t
telnet server

I am assuming you're running BASE image.

HTH

On Fri, Sep 3, 2010 at 6:07 PM, jockey wearer <jockeywearer_at_gmail.com>wrote:

> Dear All,
>
> Its OT .i am working for one project and facing very basic problem between
> two Foundry netiron switches .I have successfully completed many foundry
> projects but with BigIron .
> My two foundry netiron switches are connected to each other by direct 1G
> Fastethernet cable .It has 20 port 10/100/1000 ethernet module .
> I have connected it by cross cable and assigned ip address on interfaces
> directly .it has basic configuration but I can not ping it .
> If i check show arp it shows be arp value for next device but cant ping no
> access-list .It is directly connectd link .
> I checked post operation -everything fine
> I tried different interfaces with same config same problem .If I tried 10G
> to 10g connectivity same problem .
> but interface is UP and LINE Protocol is also
>
> If anybody has any idea please help me .
>
> Thanks
> Prashant
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Sep 04 2010 - 17:42:55 ART