Re: Frame-relay again

basically you are saying that i don't need the switch *management* any
more.

You still need its switching services :)
-Carlos
P.S.
hahahaha

Narbik Kocharians @ 25/8/2010 16:21 -0300 dixit:
> If you disable the LMIs, then, you are NOT going to get any DLCI info from
> the switch, basically you are saying that i don't need the switch any more.
> But if this is what you want to do then, enter "NO Keep" under your
> frame-relay interface. You typically do this when you have a back to back
> frame-relay configuration without using the Frame-relay switch.
> Is this what you wanted?
>
> On Thu, Aug 26, 2010 at 5:11 AM, selamat pagi <ketimun_at_gmail.com> wrote:
>
>> Yep, disabled inverse arp and reloaded. This clears out the mappings in *sh
>> fram map.*
>> However, the all the other pvc are still in *sh frame pvc.*
>>
>> Carlos, how you disable LMI without changing config on FR-switch (keepalive
>> is enable on FR-switch)
>>
>> cheers, keti
>>
>>
>>
>> On Wed, Aug 25, 2010 at 8:24 PM, Paul Negron <negron.paul_at_gmail.com>
>> wrote:
>>
>>> Did you try disabling Inverse arp and reloading the router?
>>>
>>> Paul
>>> --
>>> Paul Negron
>>> CCIE# 14856 CCSI# 22752
>>> Senior Technical Instructor
>>> www.micronicstraining.com
>>>
>>>
>>>
>>>> From: selamat pagi <ketimun_at_gmail.com>
>>>> Reply-To: selamat pagi <ketimun_at_gmail.com>
>>>> Date: Wed, 25 Aug 2010 20:07:44 +0200
>>>> To: Cisco certification <ccielab_at_groupstudy.com>
>>>> Subject: Frame-relay again
>>>>
>>>> I know this has been discussed several times here, but I still don't
>>>> have/understand the solution.
>>>> If there is none, I just will believe it and can continue with
>> something
>>>> more interesting :-)
>>>>
>>>> QUESTION:
>>>> Is there a way to avoid that the FR-switch responds with all the DLCI
>>>> configured ?
>>>> So we will only see our configured PVC in the output of "sh
>> frame-relay
>>>> pvc"
>>>>
>>>> (assumed the FR-switch config cannot be changed ;-)
>>>>
>>>> I played around with keepalive and lmi-n391dte-values, however the
>> type
>>> 0 I
>>>> don't get rid of ..?
>>>>
>>>> thanks, keti
>>>>
>>>>
>>>> Blogs and organic groups at http://www.ccie.net
>>>>
>>>> _______________________________________________________________________
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>

-- 
Carlos G Mendioroz  <tron_at_huapi.ba.ar>  LW7 EQI  Argentina
Blogs and organic groups at http://www.ccie.net