Re: OT: Router issue

Mark,

More than likely there is a problem with your IOS image - missing?

As far as I remember with legacy devices like some 3600 and 2600 boxes you
have to use xmodem to upload a fresh IOS image to your device. This process
takes AGES to get completed and can be accomplished through your normal
console cable. You don't need any extra hardware or software but bitrate as
you see below has to be properly configured (i.e. maximized).

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008009433b.shtml

HTH
Kambiz Agahian

CCIE Instructor/Consultant
M.Eng Telecom, CCIE# 25341, CCSI# 33326, MCSE, MCSA

On Mon, Aug 23, 2010 at 2:59 PM, Mark Anthony <mctony_at_ymail.com> wrote:

> Hello GS,
>
> I need someone to please help me, I have a 36xx router but it cannot boot
> to the
> normal prompt, i.e. user mode, it boots to ROM 1>
>
> I have tired all I know but the issues still persist. Can someone please
> help me
> with documentation which will help me resolve this issue.
>
> Thanks in advance.
>
> Mark
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Aug 23 2010 - 15:05:27 ART