PPPOE with DHCP and VRF + OSPF

Hi,

I am having a issue with PPPOE using DHCP and PPPOE server interface in VRF,
also running OSPF over this PPPOE link. I Just using two router topology (
http://www.ccie18473.net/dynamips/dynamips.htm#pppoe-old-dhcp-vrf).
 I am able to get IP address for dialer interface from DHCP server, also my
OSPF session is coming up fine, but the issue is that whereas server is able
to get ospf routes from client, client is not having any ospf routes from
server.

Please if someone take a look and let me know if I am missing something
here.

Server config :-

no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.16.2 192.168.16.254
!
ip dhcp pool PPPOE
   network 192.168.16.0 255.255.255.0
!
!
ip vrf ABC
 rd 1:1
!
ip vrf forwarding
!
no ip ips deny-action ips-interface
vpdn enable
!
vpdn-group CISCO
 accept-dialin
  protocol pppoe
  virtual-template 16

username LAB password 0 LAB

interface Loopback0
 ip vrf forwarding ABC
 ip address 1.1.1.1 255.255.255.255
!
interface FastEthernet0/0
 ip vrf forwarding ABC
 ip address 192.168.16.6 255.255.255.0
 duplex auto
 speed auto
 pppoe enable
!

!
interface Virtual-Template 1
 ip vrf forwarding ABC
 ip unnumbered FastEthernet0/0
 peer default ip address dhcp-pool PPPOE
 ppp authentication chap
!
router ospf 100 vrf ABC
 log-adjacency-changes
 network 1.1.1.1 0.0.0.0 area 0
 network 192.168.16.6 0.0.0.0 area 0

Client config :-

!
interface Loopback0
 ip address 2.2.2.2 255.255.255.255
!
interface FastEthernet0/0
 no ip address
 duplex auto
 speed auto
 pppoe enable
 pppoe-client dial-pool-number 1
!
interface Dialer1
 mtu 1492
 ip address dhcp
 encapsulation ppp
 dialer pool 1
 no peer neighbor-route
 ppp chap hostname LAB
 ppp chap password 0 LAB
!
router ospf 100
 log-adjacency-changes
 network 2.2.2.2 0.0.0.0 area 0
 network 192.168.16.1 0.0.0.0 area 0
!

Server side :-

Router#sh ip ospf neighbor

Neighbor ID Pri State Dead Time Address Interface
192.168.16.1 0 FULL/ - 00:00:35 192.168.16.1
Virtual-Access2.1
Router#

Router#sh ip
os
Router#sh ip ospf
da
Router#sh ip ospf
database

            OSPF Router with ID (192.168.16.6) (Process ID 100)

                Router Link States (Area 0)

Link ID ADV Router Age Seq# Checksum Link count
192.168.16.1 192.168.16.1 722 0x8000001D 0x000717 3
192.168.16.6 192.168.16.6 485 0x80000019 0x00D3FF 3
Router#
Router#sh ip route vr
Router#sh ip route vrf ABC

Routing Table: ABC
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static
route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     1.0.0.0/32 is subnetted, 1 subnets
C 1.1.1.1 is directly connected, Loopback0
     2.0.0.0/32 is subnetted, 1 subnets
O 2.2.2.2 [110/2] via 192.168.16.1, 00:08:10, Virtual-Access2.1
     192.168.0.0/16 is variably subnetted, 2 subnets, 2 masks
S 192.168.16.1/32 is directly connected, Virtual-Access2.1
C 192.168.16.0/24 is directly connected, FastEthernet0/0
Router#

Client Side :-

Router#sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static
route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     2.0.0.0/32 is subnetted, 1 subnets
C 2.2.2.2 is directly connected, Loopback0
     192.168.0.0/24 is subnetted, 1 subnets
C 192.168.16.0 is directly connected, Dialer1
Router#sh ip ospf nei
Router#sh ip ospf neighbor

Neighbor ID Pri State Dead Time Address Interface
192.168.16.6 0 FULL/ - 00:00:39 192.168.16.6
Dialer1
Router#

Router#sh ip ospf database

            OSPF Router with ID (192.168.16.1) (Process ID 100)

                Router Link States (Area 0)

Link ID ADV Router Age Seq# Checksum Link count
192.168.16.1 192.168.16.1 784 0x8000001D 0x000717 3
192.168.16.6 192.168.16.6 550 0x80000019 0x00D3FF 3
Router#

Thanks & Regards,
Gaurav

Blogs and organic groups at http://www.ccie.net
Received on Fri Aug 20 2010 - 18:25:12 ART