Re: IPV6 ROUTER EIGRP AS#

good to know...

thanks guys, so it is just a code level issue, guess I need to upgrade :)>
or just remember it is there when i do my lab....

thanks..
garry..

--
Garry L. Baker
"There is no 'patch' for stupidity." - www.sqlsecurity.com
On Tue, Aug 17, 2010 at 9:07 AM, GAURAV MADAN <gauravmadan1177_at_gmail.com>wrote:
> I can see the same CLI present in ISRs as well .
> I am using c2811 presently and it can be seen there :
>
> R1(config)#ipv6 unicast-routing
> R1(config)#ipv6 router eigrp 10
> R1(config-rtr)#def
> R1(config-rtr)#default?
> default  default-information  default-metric
>
> R1(config-rtr)#do sh ver | inc IOS
> Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9_SNA-M),
> Version 12.4(20)T, RELEASE SOFTWARE (fc3)
> R1(config-rtr)#
>
> Thnx
> Gaurav Madan
> CCIE # 23863
>
> On Tue, Aug 17, 2010 at 11:01 AM, Sonu Khandelwal (sokhande)
> <sokhande_at_cisco.com> wrote:
> > What is your image version? I see it on my router.
> >
> > R1(config-if)#ipv6 router eig 1
> > R1(config-rtr)#de
> > R1(config-rtr)#default?
> > default  default-information  default-metric
> >
> > R1(config-rtr)#default-
> > R1(config-rtr)#default-?
> > default-information  default-metric
> >
> > R1(config-rtr)#default-me
> > R1(config-rtr)#default-metric ?
> >  <1-4294967295>  Bandwidth in Kbits per second
> >
> > R1(config-rtr)#default-metric
> >
> > Thanks,
> > Sonu
> >
> > -----Original Message-----
> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> > Elliott Reyes
> > Sent: Tuesday, August 17, 2010 9:14 AM
> > To: garry baker
> > Cc: Cisco certification
> > Subject: Re: IPV6 ROUTER EIGRP AS#
> >
> > Funny I didn't see it either on my same software and hardware..
> >
> > INE ?
> >
> >
> >
> > On Mon, Aug 16, 2010 at 12:35 PM, garry baker <baker.garry_at_gmail.com>
> > wrote:
> >
> >> command reference says it exists:
> >>
> >>
> >>
> > http://www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_04.html#
> > wp2372182
> >>
> >> but not in my router with Cisco IOS Software, 3700 Software
> >> (C3725-ADVENTERPRISEK9-M), Version 12.4(15)T12, RELEASE SOFTWARE (fc3)
> >>
> >> Router(config)#ipv6 router eigrp 1
> >> Router(config-rtr)#?
> >>   default                Set a command to its defaults
> >>   distance               Administrative distance
> >>   distribute-list        Filter networks in routing updates
> >>   exit                   Exit from IPv6 routing protocol configuration
> > mode
> >>   log-neighbor-changes   Enable/Disable EIGRP neighbor logging
> >>   log-neighbor-warnings  Enable/Disable EIGRP neighbor warnings
> >>   maximum-paths          Forward packets over multiple paths
> >>   metric                 Modify EIGRP routing metrics and parameters
> >>   neighbor               Specify a neighbor router
> >>   no                     Negate a command or set its defaults
> >>   passive-interface      Suppress routing updates on an interface
> >>   redistribute           Redistribute IPv6 prefixes from another
> > routing
> >> protocol
> >>   router-id              router-id for this EIGRP process
> >>   shutdown               Shutdown protocol
> >>   stub                   Set EIGRP as stubbed router
> >>   timers                 Adjust routing timers
> >>   variance               Control load balancing variance
> >>
> >> --
> >> Garry L. Baker
> >>
> >> "There is no 'patch' for stupidity." - www.sqlsecurity.com
> >>
> >>
> >> On Mon, Aug 16, 2010 at 10:07 PM, Elliott Reyes <
> >> fontananetworkengineer_at_gmail.com> wrote:
> >>
> >>> Under ipv6 router eigrp (AS)
> >>>
> >>> I was doing the INE Lab 12 section 3.5 task and peaked at the
> > solution
> >>> guide
> >>>
> >>> It say's to add the
> >>>
> >>> default-metric command in there. I don't see it on my code level and
> > under
> >>> the command guide it say's that's only for IPV6 OSPF
> >>>
> >>> Is that right ?
> >>>
> >>> Thanks,
> >>>
> >>> Elliott
> >>>
> >>>
> >>> Blogs and organic groups at http://www.ccie.net
> >>>
> >>>
> > _______________________________________________________________________
> >>> Subscription information may be found at:
> >>> http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net