Re: FRoMPLS Query

Hi,

Can someone please let me know the way to configure FRoMPLS with FR switch
between PE and CE?.

When PE-CE is back to back connected thru serial intf, we can enable
frame-relay switching on PE and make the intf as DCE. But when we have
frame-relay switch in between PE and CE, we cannot change the intf as DCE on
PE.

I tried making the intf as DTE and configure "frame-relay interface-dlci <>
switched" and then configure layer2 connect, But the VC is still down.

I am sure, I am missing something here to bring the VC up. Can someone
please point me what I am missing?. Any pointers will be of great help.

Regards,
Nagendra

On Mon, Aug 9, 2010 at 8:02 PM, NN Kumar <nagendra.cisco_at_gmail.com> wrote:

> Hi,
>
> Can someone please point me the config required @ PE side when there is
> frame-relay switch between PE and CE as below,
>
>
> CE1-----FRSW-----PE1-----P------PE2----FRSW-----CE2
>
>
> Regards,
> Nagendra

Blogs and organic groups at http://www.ccie.net
Received on Tue Aug 10 2010 - 11:47:12 ART