Re: OSPF Cost

Asif,

Why did you configure GRE in the first place? any requirement? depending on
the wording of the question you can probably get away with a much easier
solution (net types). But have to see the exact question first.

HTH
Kambiz Agahian

CCIE Instructor/Consultant
M.Eng Telecom, CCIE# 25341, CCSI# 33326, MCSE, MCSA

On Fri, Aug 6, 2010 at 1:19 PM, Asif Vanoo <asif_at_vanoo.net> wrote:

> Hi GS
>
>
> |--------------------------R1..................................|
> SW1 |
> | sw2---------------------sw3
> |
> |
> | --------------------------R2..................................|
>
>
> Requirement : SW1 should alwayz prefer R1 to reach SW3 unless R1 is
> down.
>
> Setup
> GRE Tunnel between SW1 and R1 && Tunnel beween SW1 and R2
> OSPF runs on these tunnel
>
> On playing with OSPF cost value Sw1 send all traffic on R1 but return
> traffic to SW1 is received via R2
>
>
> Any suggestion
>
> asif
>
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Aug 08 2010 - 14:27:53 ART