Re: What is the meaning of : Process 100, Nbr 10.0.0.3 on

Taufik,

enable debug in router with command 'debug ip ospf adj' and see the output.

Regards,
Alessandro Braga

2010/7/8 Taufik Kurniawan <ktaufik_at_gmail.com>

> Thanks all,
> I will check your inputs.
>
> In the meantime, here is the complete configs.
>
> cheers,
> taufik
>
> R1
>
> R1#sh conf
> Using 1429 out of 29688 bytes
> !
> version 12.4
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname R1
> !
> boot-start-marker
> boot-end-marker
> !
> !
> no aaa new-model
> memory-size iomem 15
> ip cef
> !
> !
> !
> !
> !
> multilink bundle-name authenticated
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> archive
> log config
> hidekeys
> !
> !
> crypto isakmp policy 1
> encr 3des
> hash md5
> authentication pre-share
> group 5
> lifetime 4000
> crypto isakmp key kunci address 10.0.0.0 255.255.255.248
> !
> !
> crypto ipsec transform-set transet ah-md5-hmac esp-3des esp-sha-hmac
> comp-lzs
> !
> crypto map mymap 1 ipsec-isakmp
> set peer 10.0.0.2
> set peer 10.0.0.3
> set peer 10.0.0.4
> set transform-set transet
> match address 100
> !
> !
> !
> !
> !
> !
> !
> interface Loopback0
> ip address 202.155.10.1 255.255.255.0
> !
> interface Ethernet0
> no ip address
> shutdown
> half-duplex
> !
> interface FastEthernet0
> ip address 10.0.0.1 255.255.255.0
> ip ospf authentication message-digest
> ip ospf message-digest-key 1 md5 kunciospf
> ip ospf cost 1
> ip ospf priority 101
> speed auto
> crypto map mymap
> !
> router ospf 100
> log-adjacency-changes
> area 0 authentication message-digest
> network 10.0.0.0 0.0.0.255 area 0
> network 202.155.10.0 0.0.0.255 area 1
> !
> !
> access-list 100 permit ip 10.0.0.0 0.0.0.255 10.0.0.0 0.0.0.255
>
>
> R2
> crypto isakmp policy 1
> encr 3des
> hash md5
> authentication pre-share
> group 5
> lifetime 4000
> crypto isakmp key kunci address 10.0.0.1
> !
> !
> crypto ipsec transform-set transet ah-md5-hmac esp-3des esp-sha-hmac
> comp-lzs
> !
> crypto map mymap 1 ipsec-isakmp
> set peer 10.0.0.1
> set transform-set transet
> match address 100
> !
> !
> !
> !
> !
> !
> !
> interface Loopback0
> ip address 202.155.20.1 255.255.255.0
> !
> interface Ethernet0
> no ip address
> shutdown
> half-duplex
> !
> interface FastEthernet0
> ip address 10.0.0.2 255.255.255.0
> ip ospf authentication message-digest
> ip ospf message-digest-key 1 md5 kunciospf
> ip ospf cost 2
> ip ospf priority 102
> speed auto
> crypto map mymap
> !
> router ospf 100
> log-adjacency-changes
> area 0 authentication message-digest
> network 10.0.0.0 0.0.0.255 area 0
> network 202.155.20.0 0.0.0.255 area 2
> !
> access-list 100 permit ip 10.0.0.0 0.0.0.255 10.0.0.0 0.0.0.255
> !
>
> R3
>
> !
> crypto isakmp policy 1
> encr 3des
> hash md5
> authentication pre-share
> group 5
> lifetime 6000
> crypto isakmp key kunci address 10.0.0.1
> !
> !
> crypto ipsec transform-set transet esp-3des esp-sha-hmac comp-lzs
> !
> crypto map mymap 1 ipsec-isakmp
> set peer 10.0.0.1
> set transform-set transet
> match address 100
> !
> !
> !
> !
> !
> !
> !
> interface Loopback0
> ip address 202.155.30.1 255.255.255.0
> !
> interface Ethernet0
> no ip address
> shutdown
> half-duplex
> !
> interface FastEthernet0
> ip address 10.0.0.3 255.255.255.0
> ip ospf authentication message-digest
> ip ospf message-digest-key 1 md5 kunciospf
> ip ospf cost 3
> ip ospf priority 103
> speed auto
> crypto map mymap
> !
> router ospf 100
> log-adjacency-changes
> area 0 authentication message-digest
> network 10.0.0.0 0.0.0.255 area 0
> network 202.155.30.0 0.0.0.255 area 3
> !
> !
> access-list 100 permit ip 10.0.0.0 0.0.0.255 10.0.0.0 0.0.0.255
> !
>
> R4
>
> !
> crypto isakmp policy 1
> encr 3des
> hash md5
> authentication pre-share
> group 5
> lifetime 2000
> crypto isakmp key kunci address 10.0.0.1
> !
> !
> crypto ipsec transform-set transet ah-md5-hmac esp-3des esp-sha-hmac
> comp-lzs
> !
> crypto map mymap 1 ipsec-isakmp
> set peer 10.0.0.1
> set transform-set transet
> match address 100
> !
> !
> !
> !
> !
> !
> !
> interface Loopback0
> ip address 202.155.40.1 255.255.255.0
> ip ospf 100 area 4
> !
> interface Ethernet0
> no ip address
> shutdown
> half-duplex
> !
> interface FastEthernet0
> ip address 10.0.0.4 255.255.255.0
> ip ospf authentication message-digest
> ip ospf message-digest-key 1 md5 kunciospf
> ip ospf cost 4
> ip ospf priority 104
> ip ospf 100 area 0
> speed auto
> crypto map mymap
> !
> router ospf 100
> log-adjacency-changes
> area 0 authentication message-digest
> !
> !
> access-list 100 permit ip 10.0.0.0 0.0.0.255 10.0.0.0 0.0.0.255
> !
>
>
>
>
>
>
> On 8 July 2010 12:54, Taufik Kurniawan <ktaufik_at_gmail.com> wrote:
>
> > R1, R2, R3, R4 ospf in their f0
> >
> > R1 and R2 is ok, but when i start R3 ... it is ok for sometime .. then R3
> > disconnected.
> > It happen also when i try to activate R4 ...
> >
> > What am I missing here ? ... sorry newbie ospf :)
> >
> > R1.
> >
> > interface Loopback0
> > ip address 202.155.10.1 255.255.255.0
> > !
> > interface Ethernet0
> > no ip address
> > shutdown
> > half-duplex
> > !
> > interface FastEthernet0
> > ip address 10.0.0.1 255.255.255.0
> > ip ospf authentication message-digest
> > ip ospf message-digest-key 1 md5 kunciospf
> > ip ospf cost 1
> > ip ospf priority 101
> > speed auto
> > crypto map mymap
> > !
> > router ospf 100
> > log-adjacency-changes
> > area 0 authentication message-digest
> > network 10.0.0.0 0.0.0.255 area 0
> > network 202.155.10.0 0.0.0.255 area 1
> >
> >
> > R2.
> >
> > interface Loopback0
> > ip address 202.155.20.1 255.255.255.0
> > !
> > interface Ethernet0
> > no ip address
> > shutdown
> > half-duplex
> > !
> > interface FastEthernet0
> > ip address 10.0.0.2 255.255.255.0
> > ip ospf authentication message-digest
> > ip ospf message-digest-key 1 md5 kunciospf
> > ip ospf cost 2
> > ip ospf priority 102
> > speed auto
> > crypto map mymap
> > !
> > router ospf 100
> > log-adjacency-changes
> > area 0 authentication message-digest
> > network 10.0.0.0 0.0.0.255 area 0
> > network 202.155.20.0 0.0.0.255 area 2
> >
> >
> > R3 and R4 just typical like R2
> >
> >
> > thanks for help.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Jul 08 2010 - 10:41:06 ART