Re: RE: Mfr config on frame switch.

Excellent. Thank you.

On Mon, Jun 28, 2010 at 1:51 PM, Tyson Scott <tscott_at_ipexpert.com> wrote:

> No requirements for MPLS and L2TPv3.
>
>
>
> For MFR
>
>
>
> frame-relay switching
>
> !
>
> interface MFR1
>
> encapsulation frame-relay
>
> frame-relay route 102 interface MFR2 201
>
> !
>
> interface MFR2
>
> encapsulation frame-relay
>
> frame-relay route 201 interface MFR1 102
>
> !
>
> int s0/0/0
>
> encapsulation frame-relay mfr1
>
> frame-relay intf-type dce
>
> clock rate 4000000
>
> int s0/0/1
>
> encapsulation frame-relay mfr1
>
> frame-relay intf-type dce
>
> clock rate 4000000
>
> !
>
> int s0/1/0
>
> encapsulation frame-relay mfr2
>
> frame-relay intf-type dce
>
> clock rate 4000000
>
> int s0/1/1
>
> encapsulation frame-relay mfr2
>
> frame-relay intf-type dce
>
> clock rate 4000000
>
>
>
> This is not going to work on the OLD 2500's. You need a 2600 or better to
> do the above.
>
>
>
>
>
>
>
>
>
> Regards,
>
>
>
> Tyson Scott - CCIE #13513 R&S, Security, and SP
>
> Managing Partner / Sr. Instructor - IPexpert, Inc.
>
> Mailto: tscott_at_ipexpert.com
>
> Telephone: +1.810.326.1444, ext. 208
>
> Live Assistance, Please visit: www.ipexpert.com/chat
>
> eFax: +1.810.454.0130
>
>
>
> IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
> Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
> CCIE (R&S, Voice, Security & Service Provider) certification(s) with
> training locations throughout the United States, Europe, South Asia and
> Australia. Be sure to visit our online communities at
> www.ipexpert.com/communities and our public website at www.ipexpert.com
>
>
>
> *From:* Brian Buxton [mailto:herrbuxy_at_gmail.com]
> *Sent:* Monday, June 28, 2010 1:33 PM
> *To:* Tyson Scott
> *Cc:* CCIE Groupstudy
> *Subject:* Re: RE: Mfr config on frame switch.
>
>
>
> There is no special config for MFR on the frame switch? How would you setup
> the same frame route on multiple interfaces with a matching MFR config on
> the FR switch? Am I just making this harder than it needs to be?
>
> On Jun 28, 2010 1:05 PM, "Tyson Scott" <tscott_at_ipexpert.com> wrote:
>
> What are you wanting to know how to do. How to configure MFR on the frame
> switch? There are no requirements for configuring the functions for the
> protocols you suggest.
>
> Regards,
>
> Tyson Scott - CCIE #13513 R&S, Security, and SP
> Managing Partner / Sr. Instructor - IPexpert, Inc.
> Mailto: tscott_at_ipexpert.com
>
>
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf O...
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jun 28 2010 - 14:44:59 ART