Re: Adding Configurations not Required

You can do whatever you want with something like a hello interval - as long as it does not conflict with another task requirement. This is the rule of thumb for everything you configure in the lab exam.

As far as the removal of aliases...this is recommend by the proctors because there have been cases where their existence foiled their grading efforts. You see, if they have any problem whatsoever with their grading process - they instantly fail you. Examples would be you locked them out of a device, or your aliases were left in and caused a problem.

On Jun 25, 2010, at 1:19 PM, Grammer, Christopher wrote:

> When configuring OSPF over Non-Broadcast frame relay, one quickly discovers
> that it take approximately 9 years and 4 days for the neigh relationship to
> form because of the long hello interval. Would it be permissible to lower
> the hello interval to 1 for the sake time savings?
>
> Should it be removed at the end of the lab?
>
> Its the same with the alias command that we all use. One one lab attempt, a
> proctor said at the beginning to make sure you remove aliases and set the
> vty and console back to the way it was when the lab began.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Jun 25 2010 - 13:51:47 ART