changing ospf distance

Hi,

As you see below I have changed ospf distance to 115 and then some routes
have been deleted and then added again.But finally in the routing table the
AD for ospf routes are the same as ospf usual AD 110.Did I do something
wrong?

r3#
r3#conf t
Enter configuration commands, one per line. End with CNTL/Z.
r3(config)#router ospf 1
r3(config-router)#distance 115 10.1.34.3 0.0.0.0 11
r3(config-router)#end
r3#
*Mar 1 02:41:33.255: RT: delete route to 10.1.46.0/24
*Mar 1 02:41:33.255: RT: NET-RED 10.1.46.0/24
*Mar 1 02:41:33.255: RT: delete route to 10.1.56.0/24
*Mar 1 02:41:33.255: RT: NET-RED 10.1.56.0/24
*Mar 1 02:41:33.283: RT: add 10.1.56.0/24 via 10.1.34.4, ospf metric
[110/30]
*Mar 1 02:41:33.283: RT: NET-RED 10.1.56.0/24
*Mar 1 02:41:33.283: RT: add 10.1.46.0/24 via 10.1.34.4, ospf metric
[110/20]
*Mar 1 02:41:33.287: RT: NET-RED 10.1.46.0/24
*Mar 1 02:41:34.351: %SYS-5-CONFIG_I: Configured from console by console
r3#
r3#
r3#
r3#sh ip ro
r3#sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static
route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     2.0.0.0/24 is subnetted, 1 subnets
R 2.2.2.0 [120/1] via 10.1.35.5, 00:00:20, Serial0/0
     33.0.0.0/24 is subnetted, 1 subnets
C 33.33.33.0 is directly connected, Loopback1
     3.0.0.0/24 is subnetted, 1 subnets
C 3.3.3.0 is directly connected, Loopback0
     5.0.0.0/24 is subnetted, 1 subnets
R 5.5.5.0 [120/1] via 10.1.35.5, 00:00:20, Serial0/0
     22.0.0.0/24 is subnetted, 1 subnets
R 22.22.22.0 [120/1] via 10.1.35.5, 00:00:20, Serial0/0
     10.0.0.0/24 is subnetted, 6 subnets
R 10.1.12.0 [120/1] via 10.1.35.5, 00:00:20, Serial0/0
C 10.1.23.0 is directly connected, FastEthernet0/1
O 10.1.46.0 [110/20] via 10.1.34.4, 00:00:18, FastEthernet0/0
C 10.1.35.0 is directly connected, Serial0/0
C 10.1.34.0 is directly connected, FastEthernet0/0
O 10.1.56.0 [110/30] via 10.1.34.4, 00:00:19

Blogs and organic groups at http://www.ccie.net
Received on Sun Jun 20 2010 - 22:04:11 ART