Re: Cisco 3825 - Console Port Not Responding

And 1% chances are that you fried the serial port.
If you can still log into the router via telnet, or if you can ping the
router to confirm it is up and running, that might be it.
Also, the 3825 has an aux port. If your serial terminal emulator does
work with the aux but not the console, you are in for a nasty
experience.

-Carlos

Joe Astorino @ 12/06/2010 16:53 -0300 dixit:
> 99 chances out of 100 it is usually a software issue. I would double check then triple check my settings, and/or try different serial port settings. I would try 9600 speed/8 data bits/1 stop bit/no parity/no flow control first.....then play with variations of speed. Do you get any response at all like garbled output???
>
> Regards,
> Joe Astorino, CCIE #24347
>
> "He not busy being born is busy dying" -- Dylan
>
> ----- Original Message -----
> From: "ftt" <femi0802_at_googlemail.com>
> To: ccielab_at_groupstudy.com
> Sent: Saturday, June 12, 2010 3:26:32 PM GMT -05:00 US/Canada Eastern
> Subject: Cisco 3825 - Console Port Not Responding
>
> Hi All,
>
> I have a Cisco 3825 router which does boot up but I cannot log on via the
> console port.
>
> I've alway logged on to this router via console port but it just stopped
> working today.
>
> Does anyone know how I can recover this console port/Router ?
>
> Regards
>
> FTT
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>

-- 
Carlos G Mendioroz  <tron_at_huapi.ba.ar>  LW7 EQI  Argentina
Blogs and organic groups at http://www.ccie.net