Re: ASA OOB Management

Hi Adam,

Note as far as I know the management interface doesn't come with a default
ip address assigned.

aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 inside (This command specifies who is allowed to access
the inside interface via http)
Create a username of your preference

Make sure asdm file is available
For instance asdm-625-53.bin matches for asa822-k8.bin

Then try https://(ip address of ASA) from an allowed IP address
in the list.

Best Regards,

On Sun, Jun 6, 2010 at 9:53 PM, adam gibs <adamgibs7_at_gmail.com> wrote:

> Hello Friends,
>
> When I change the management interface default IP (192.168.1.1) and change
> to any other IP ,and when i try to access it is not accessible by HTTPS,
> but
> when i again change to default it is accessible also i have tried to access
> through inside IP though it is not accessible, I think i have to change the
> command in factory default configs
>
> i.e http 192.168.1.0 255.255.255.0 management
>
> when i will change the above command from default to INSIDE IP ADDRESS
> SUBNET it should be accessible?????? Am i right ???
>
> Thanks
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
KJ
Blogs and organic groups at http://www.ccie.net