Re: ASA OOB Management

Hello Karim,

Please see below the factory configs:

hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface GigabitEthernet0/0
 shutdown
 no nameif
 no security-level
 no ip address
!
interface GigabitEthernet0/1
 shutdown
 no nameif
 no security-level
 no ip address
!
interface GigabitEthernet0/2
 shutdown
 no nameif
 no security-level
 no ip address
!
interface GigabitEthernet0/3
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Management0/0
 nameif management
 security-level 100
 ip address 192.168.1.1 255.255.255.0
 management-only
!
ftp mode passive
pager lines 24
logging asdm informational
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat
0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect
0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect rsh
  inspect rtsp
  inspect esmtp
  inspect sqlnet
  inspect skinny
  inspect sunrpc
  inspect xdmcp
  inspect sip
  inspect netbios
  inspect tftp
!
service-policy global_policy global
prompt hostname context

what u have suggested is correct for my scenario but i want to clear things
more. Can u suggest now by watching the default configs from factory.

Thanks

On Sun, Jun 6, 2010 at 11:01 PM, karim jamali <karim.jamali_at_gmail.com>wrote:

> Hi Adam,
>
> Note as far as I know the management interface doesn't come with a default
> ip address assigned.
>
> aaa authentication http console LOCAL
> aaa authentication ssh console LOCAL
> http server enable
> http 0.0.0.0 0.0.0.0 inside (This command specifies who is allowed to
> access the inside interface via http)
> Create a username of your preference
>
> Make sure asdm file is available
> For instance asdm-625-53.bin matches for asa822-k8.bin
>
> Then try https://(ip address of ASA) from an allowed IP address
> in the list.
>
> Best Regards,
>
> On Sun, Jun 6, 2010 at 9:53 PM, adam gibs <adamgibs7_at_gmail.com> wrote:
>
>> Hello Friends,
>>
>> When I change the management interface default IP (192.168.1.1) and change
>> to any other IP ,and when i try to access it is not accessible by HTTPS,
>> but
>> when i again change to default it is accessible also i have tried to
>> access
>> through inside IP though it is not accessible, I think i have to change
>> the
>> command in factory default configs
>>
>> i.e http 192.168.1.0 255.255.255.0 management
>>
>> when i will change the above command from default to INSIDE IP ADDRESS
>> SUBNET it should be accessible?????? Am i right ???
>>
>> Thanks
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> KJ

Blogs and organic groups at http://www.ccie.net
Received on Sun Jun 06 2010 - 23:17:45 ART