RE: RFC1483 Bridging

Dialer Persitent did not help.

************************************************

ERIKS-TEST-R1(config-if)#dialer persistent

ERIKS-TEST-R1(config-if)#end

ERIKS-TEST-R1#

Di1 DDR: Dialer cannot nail-up the profile - dialer string not configured

*************************************

PPP fails to come up for the same reason.

FYI : PPP Encap properly set up on the dialer interface.

Thanks and Regards

Arun

> From: jastorino_at_ipexpert.com
> Date: Wed, 19 May 2010 13:19:17 -0400
> Subject: Re: RFC1483 Bridging
> To: aarumuga_at_hotmail.com; tscott_at_ipexpert.com; ipnish_at_gmail.com
> CC: aarumuganainar_at_relianceglobalcom.com; ccielab_at_groupstudy.com
>
> Apologies if my messages are duplicated...my blackberry is telling me
> the message failed and evidently it did not!
>
> On Wed, May 19, 2010 at 1:14 PM, Joe Astorino <jastorino_at_ipexpert.com>
wrote:
> > Did you try "dialer persistent" to get the dialer up? Also make sure
dialer
> > has "encap ppp" this is often overlooked
> >
> > Sent from my Verizon Wireless BlackBerry
> >
> > Regards,
> >
> > Joe Astorino - CCIE #24347
> > Sr. Technical Instructor - IPexpert
> > Mailto: jastorino_at_ipexpert.com
> > Telephone: +1.810.326.1444
> > Live Assistance, Please visit: www.ipexpert.com/chat
> > eFax: +1.810.454.0130
> >
> > IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
> > Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
> > CCIE (R&S, Voice, Security & Service Provider) certification(s) with
> > training locations throughout the United States, Europe, South Asia and
> > Australia. Be sure to visit our online communities at
> > www.ipexpert.com/communities and our public website at www.ipexpert.com
> > ________________________________
> > From: Arun Kumar Arumuganainar <aarumuga_at_hotmail.com>
> > Date: Wed, 19 May 2010 22:02:06 +0530
> > To: <tscott_at_ipexpert.com>; <ipnish_at_gmail.com>
> > Cc: <jastorino_at_ipexpert.com>; Arun
> > Reliance<aarumuganainar_at_relianceglobalcom.com>; <ccielab_at_groupstudy.com>
> > Subject: RE: RFC1483 Bridging
> > Hi TYson,
> >
> > I was able to get it to work with out problems by terminate the DSL line
on
> > the router( WIC1-ADSL Card ). But problem happens only when DSL line
> > terminates on to a modem and router gets a ethernet handoff . Here I
> > am trying to establish the PPPoE over Ethernet interface.
> >
> > I belive this link that you have sent does not talk about the scenario -
1(
> > DSL line terminating on to the router ) .
> >
> > Thanks and Regards
> > Arun
> >
> > ________________________________
> > From: tscott_at_ipexpert.com
> > To: aarumuga_at_hotmail.com; ipnish_at_gmail.com
> > CC: jastorino_at_ipexpert.com; aarumuganainar_at_relianceglobalcom.com;
> > ccielab_at_groupstudy.com
> > Subject: RE: RFC1483 Bridging
> > Date: Wed, 19 May 2010 12:25:26 -0400
> >
> > I am sorry I missed the FastEthernet interface. Why are you not using
this
> > as the DSL router instead of the modem if you have the ATM interface? I
> > must be really out of it today to have missed these things.
> >
> >
> >
> > Here is a sample configuration for configuring the router as a DSL
router.
> >
> >
> >
> >
http://www.cisco.com/en/US/products/hw/routers/ps2167/products_configuration_
example09186a0080093fcf.shtml
> >
> >
> >
> > Regards,
> >
> >
> >
> > Tyson Scott - CCIE #13513 R&S, Security, and SP
> >
> > Technical Instructor - IPexpert, Inc.
> >
> > Mailto: tscott_at_ipexpert.com
> >
> > Telephone: +1.810.326.1444, ext. 208
> >
> > Live Assistance, Please visit: www.ipexpert.com/chat
> >
> > eFax: +1.810.454.0130
> >
> >
> >
> > IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
> > Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
> > CCIE (R&S, Voice, Security & Service Provider) certification(s) with
> > training locations throughout the United States, Europe, South Asia and
> > Australia. Be sure to visit our online communities at
> > www.ipexpert.com/communities and our public website at www.ipexpert.com
> >
> >
> >
> > From: Arun Kumar Arumuganainar [mailto:aarumuga_at_hotmail.com]
> > Sent: Wednesday, May 19, 2010 12:15 PM
> > To: tscott_at_ipexpert.com; ipnish_at_gmail.com
> > Cc: jastorino_at_ipexpert.com; Arun Reliance; ccielab_at_groupstudy.com
> > Subject: RE: RFC1483 Bridging
> >
> >
> >
> > HiTyson,
> >
> > PVC is terminating on to Modem Which sits inbetween 1841 and DSLAM
> >
> > Do you have the sample configs or any documents that talks about this. I
> > will be interested in knowing this in bit detail.
> >
> > Thanks and Regards
> > Arun
> >
> >> From: tscott_at_ipexpert.com
> >> To: aarumuga_at_hotmail.com; ipnish_at_gmail.com
> >> CC: jastorino_at_ipexpert.com; aarumuganainar_at_relianceglobalcom.com;
> >> ccielab_at_groupstudy.com
> >> Subject: RE: RFC1483 Bridging
> >> Date: Wed, 19 May 2010 12:11:29 -0400
> >>
> >> OK, looking thru your configuration.
> >>
> >> You need to have a pvc with the vpi/vci and under this apply
> >> pppoe-client dial-pool-number 1
> >>
> >> You will need to find the pvc information from your provider.
> >>
> >>
> >> Regards,
> >>
> >> Tyson Scott - CCIE #13513 R&S, Security, and SP
> >> Technical Instructor - IPexpert, Inc.
> >> Mailto: tscott_at_ipexpert.com
> >> Telephone: +1.810.326.1444, ext. 208
> >> Live Assistance, Please visit: www.ipexpert.com/chat
> >> eFax: +1.810.454.0130
> >>
> >> IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
> >> Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
> >> CCIE (R&S, Voice, Security & Service Provider) certification(s) with
> >> training locations throughout the United States, Europe, South Asia and
> >> Australia. Be sure to visit our online communities at
> >> www.ipexpert.com/communities and our public website at www.ipexpert.com
> >>
> >>
> >> -----Original Message-----
> >> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> >> Arun
> >> Kumar Arumuganainar
> >> Sent: Wednesday, May 19, 2010 11:45 AM
> >> To: ipnish_at_gmail.com
> >> Cc: jastorino_at_ipexpert.com; Arun Reliance; ccielab_at_groupstudy.com
> >> Subject: RE: RFC1483 Bridging
> >>
> >> Hi Nish ,
> >>
> >>
> >>
> >> THe problem I am seeing is that PPP never kicks in. Dialer is not
> >> initiating
> >> the PPP Session because it thinks that Dialer string is not set.
> >>
> >>
> >>
> >> I understand if PPP authentication is the problem I would have got the
PPP
> >> debugs which would clearly tell me that authentiation has indeed failed.
> >>
> >>
> >>
> >> Having said that I did change the configuration and found that nothing
> >> changed
> >> after enabling PAP ( as per your instruction ). Moreover I stuck the
> >> configs
> >> on the ATM interface ( WIC1-ADSL on 1841 ) , there is not problem in
> >> getting
> >> authenticated via CHAP . I removed the bridging on Modem and applied the
> >> same
> >> user name and password on the MODEM , it worked absolutely fine. It
> >> appears
> >> to
> >> me that this is not a PPP issue but a dialer issue. But I could not
figure
> >> out
> >> why dialer is looking for a dialer string for initiating PPP.
> >>
> >>
> >>
> >> Thanks and Regards
> >>
> >> Arun
> >>
> >> > Date: Wed, 19 May 2010 16:29:30 +0100
> >> > Subject: Re: RFC1483 Bridging
> >> > From: ipnish_at_gmail.com
> >> > To: aarumuga_at_hotmail.com
> >> > CC: jastorino_at_ipexpert.com; aarumuganainar_at_relianceglobalcom.com;
> >> ccielab_at_groupstudy.com
> >> >
> >> > ppp authentication chap pap callin
> >> > ppp chap password 7 PASSWORD
> >> > ppp pap sent-username user_at_name password 7 PASSWORD
> >> >
> >> > Tell me whether this work please?
> >> >
> >> > Thanks,
> >> >
> >> > Regards,
> >> > Nish
> >> >
> >> >
> >> > On Wed, May 19, 2010 at 4:20 PM, Arun Kumar Arumuganainar <
> >> > aarumuga_at_hotmail.com> wrote:
> >> >
> >> > > Hi Jose,
> >> > >
> >> > >
> >> > >
> >> > > I re-did this lab testing with 1841 running 12.4(11)T7 Advance
> >> > > IPSERVCES
> >> > > image.
> >> > >
> >> > >
> >> > >
> >> > > Router Model : 1841
> >> > >
> >> > > Topology : 1841----MODEM(RFC1483
> >> > > Bridge)---------DSLAM(LAC)----IPCLOUD----Providermanaged LNS
> >> > >
> >> > >
> >> > > I enabled following debug
> >> > >
> >> > >
> >> > >
> >> > > 1) PPP Neg and PPP AUTH
> >> > >
> >> > > 2) Dialer events
> >> > >
> >> > >
> >> > >
> >> > > When I tried to genarate the traffic I could see dialer is not
> >> initiating
> >> > > the
> >> > > PPP at all.
> >> > >
> >> > >
> >> > >
> >> > > Any ideas what could be wrong. I appreciate any help in resolving
this
> >> > > issue.
> >> > >
> >> > >
> >> > > ERIKS-TEST-R1#ping 172.20.83.1
> >> > >
> >> > > Type escape sequence to abort.
> >> > > Sending 5, 100-byte ICMP Echos to 172.20.83.1, timeout is 2 seconds:
> >> > >
> >> > > Di1 DDR: ip (s=172.30.128.9, d=172.20.83.1), 100 bytes, outgoing
> >> > > interesting
> >> > > (ip PERMIT)
> >> > > Di1 DDR: Cannot place call, no dialer string set.
> >> > > Di1 DDR: ip (s=172.30.128.9, d=172.20.83.1), 100 bytes, outgoing
> >> > > interesting
> >> > > (ip PERMIT)
> >> > > Di1 DDR: Cannot place call, no dialer string set
> >> > > Di1 DDR: ip (s=172.30.128.9, d=82.196.34.254), 76 bytes, outgoing
> >> > > interesting
> >> > > (ip PERMIT)
> >> > > Di1 DDR: Cannot place call, no dialer string set.
> >> > > Di1 DDR: ip (s=172.30.128.9, d=172.20.83.1), 100 bytes, outgoing
> >> > > interesting
> >> > > (ip PERMIT)
> >> > > Di1 DDR: Cannot place call, no dialer string set.
> >> > > Di1 DDR: ip (s=172.30.128.9, d=172.20.83.1), 100 bytes, outgoing
> >> > > interesting
> >> > > (ip PERMIT)
> >> > > Di1 DDR: Cannot place call, no dialer string set.
> >> > > Di1 DDR: ip (s=172.30.128.9, d=172.20.83.1), 100 bytes, outgoing
> >> > > interesting
> >> > > (ip PERMIT)
> >> > > Di1 DDR: Cannot place call, no dialer string set.
> >> > > Success rate is 0 percent (0/5)
> >> > >
> >> > >
> >> > > Pls find below router configs .
> >> > >
> >> > >
> >> > >
> >> > > ERIKS-TEST-R1#
> >> > >
> >> > >
> >> > > RUnning configuration:-
> >> > >
> >> > > Building configuration...
> >> > >
> >> > > Current configuration : 1575 bytes
> >> > > !
> >> > > version 12.3
> >> > > no service timestamps debug uptime
> >> > > service timestamps log datetime msec
> >> > > no service password-encryption
> >> > > !
> >> > > hostname ERIKS-TEST-R1
> >> > > !
> >> > > boot-start-marker
> >> > > boot-end-marker
> >> > > !
> >> > > enable secret 5 $1$HxhJ$Xr15HUD0MhM1BahR3vQxI.
> >> > > !
> >> > > memory-size iomem 25
> >> > > mmi polling-interval 60
> >> > > no mmi auto-configure
> >> > > no mmi pvc
> >> > > mmi snmp-timeout 180
> >> > > no aaa new-model
> >> > > ip subnet-zero
> >> > > ip cef
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > no ip domain lookup
> >> > > ip ips po max-events 100
> >> > > vpdn enable
> >> > > !
> >> > > vpdn-group 1
> >> > > request-dialin
> >> > > protocol pppoe
> >> > > !
> >> > > no ftp-server write-enable
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > no crypto isakmp ccm
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > interface Loopback0
> >> > > ip address 172.30.128.9 255.255.255.255
> >> > > !
> >> > > interface FastEthernet0/0
> >> > > no ip address
> >> > > speed 100
> >> > > full-duplex
> >> > > pppoe enable group global
> >> > > pppoe-client dial-pool-number 1
> >> > > !
> >> > > interface FastEthernet0/1
> >> > > no ip address
> >> > > duplex auto
> >> > > speed auto
> >> > > !
> >> > > interface ATM0/1/0
> >> > > no ip address
> >> > > no atm ilmi-keepalive
> >> > > dsl operating-mode auto
> >> > > !
> >> > > interface Dialer1
> >> > > description ADSL2+ 02085605343 Provider TISCALI
> >> > > ip address negotiated
> >> > > ip mtu 1460
> >> > > encapsulation ppp
> >> > > ip tcp adjust-mss 1420
> >> > > dialer pool 1
> >> > > dialer-group 1
> >> > > no cdp enable
> >> > > ppp chap hostname <<HOST NAME REMOVED>>
> >> > >
> >> > > ppp chap password 0 <<PASSWORD REMOVED>>
> >> > > ppp pap refuse
> >> > > !
> >> > > ip classless
> >> > > ip route 0.0.0.0 0.0.0.0 Dialer1
> >> > > !
> >> > > !
> >> > > ip http server
> >> > > no ip http secure-server
> >> > > !
> >> > > dialer-list 1 protocol ip permit
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > control-plane
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > !
> >> > > line con 0
> >> > > line aux 0
> >> > > line vty 0 4
> >> > > password vanco
> >> > > login
> >> > >
> >> > >
> >> > >
> >> > > Thanks and Regards
> >> > >
> >> > > Arun
> >> > >
> >> > >
> >> > >
> >> > > =========================
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > > > From: jastorino_at_ipexpert.com
> >> > > > Date: Tue, 18 May 2010 15:49:10 -0400
> >> > > > Subject: Re: RFC1483 Bridging
> >> > > > To: aarumuga_at_hotmail.com
> >> > > > CC: aarumuganainar_at_relianceglobalcom.com; ccielab_at_groupstudy.com
> >> > > >
> >> > > > Try debug ppp neg / debug ppp auth and see what you get
> >> > > >
> >> > > > On Tue, May 18, 2010 at 10:32 AM, Arun Kumar Arumuganainar
> >> > > > <aarumuga_at_hotmail.com> wrote:
> >> > > > > I did tried the configs that you have suggested . I did not see
> >> > > > > any
> >> > > activity
> >> > > > > on the router.
> >> > > > >
> >> > > > > I did enable PPP authentication. But did not get any message
back
> >> > > > >
> >> > > > > Am I missing something? Is there any debug commands that I can
use
> >> to
> >> > > spot
> >> > > > > where the issue is.
> >> > > > >
> >> > > > > Thanks and Regards
> >> > > > > Arun
> >> > > > >
> >> > > > >> From: jastorino_at_ipexpert.com
> >> > > > >> Date: Tue, 18 May 2010 06:57:47 -0400
> >> > > > >> Subject: Re: RFC1483 Bridging
> >> > > > >> To: aarumuga_at_hotmail.com
> >> > > > >> CC: aarumuganainar_at_relianceglobalcom.com;
ccielab_at_groupstudy.com
> >> > > > >>
> >> > > > >> Hi Arun,
> >> > > > >>
> >> > > > >> First, make sure you set your DSL modem to bridged mode
properly
> >> like
> >> > > > >> you said. Then, you will need to configure PPPoE on the Cisco
> >> router.
> >> > > > >> Give this a try
> >> > > > >>
> >> > > > >> interface FastEthernet0/0
> >> > > > >> no ip address
> >> > > > >> pppoe enable
> >> > > > >> pppoe-client dial-pool-number 1
> >> > > > >> !
> >> > > > >> interface Dialer1
> >> > > > >> mtu 1492
> >> > > > >> ip address negotiated
> >> > > > >> encapsulation ppp
> >> > > > >> dialer pool 1
> >> > > > >>
> >> > > > >> HTH
> >> > > > >>
> >> > > > >>
> >> > > > >>
> >> > > > >> On Tue, May 18, 2010 at 6:35 AM, Arun Kumar Arumuganainar
> >> > > > >> <aarumuga_at_hotmail.com> wrote:
> >> > > > >> > Hi,
> >> > > > >> >
> >> > > > >> >
> >> > > > >> >
> >> > > > >> > I need some help in setting my router. My set up look like
> >> > > > >> > this.
> >> > > > >> >
> >> > > > >> >
> >> > > > >> >
> >> > > > >> > 877 ------- NETGEAR/DLINIK MODEM----------------PROVIDER
DSALAM
> >> > > > >> >
> >> > > > >> >
> >> > > > >> >
> >> > > > >> > I wanted PPPOE terminating on to my router's ethernet
interface
> >> > > rather
> >> > > > >> > than
> >> > > > >> > the modem. The reason being , I wanted to do some clever
stuff
> >> :-)
> >> > > > >> > behind the
> >> > > > >> > router.
> >> > > > >> >
> >> > > > >> >
> >> > > > >> >
> >> > > > >> > I could see there are options available on NETGEAR or DLINK
> >> > > > >> > modem
> >> > > for
> >> > > > >> > RFC
> >> > > > >> > 1483 Bridging. But could not figure out how to configure 877
.
> >> > > > >> >
> >> > > > >> >
> >> > > > >> >
> >> > > > >> > Do any body have any sample configuration for such a type of
> >> > > scenario.
> >> > > > >> > It
> >> > > > >> > would be great if you can help me here.
> >> > > > >> >
> >> > > > >> >
> >> > > > >> >
> >> > > > >> > Thanks and Regards
> >> > > > >> >
> >> > > > >> > Arun
> >> > > > >> >
> >> > > > >> >
> >> > > > >>
> >> > > > >> >
>_________________________________________________________________
> >> > > > >> > Catch the latest in the world of fashion
> >> > > > >> > http://lifestyle.in.msn.com/
> >> > > > >> >
> >> > > > >> >
> >> > > > >> > Blogs and organic groups at http://www.ccie.net
> >> > > > >> >
> >> > > > >> >
> >> >
>_______________________________________________________________________
> >> > > > >> > Subscription information may be found at:
> >> > > > >> > http://www.groupstudy.com/list/CCIELab.html
> >> > > > >> >
> >> > > > >> >
> >> > > > >> >
> >> > > > >> >
> >> > > > >> >
> >> > > > >> >
> >> > > > >> >
> >> > > > >> >
> >> > > > >>
> >> > > > >>
> >> > > > >>
> >> > > > >> --
> >> > > > >> Regards,
> >> > > > >>
> >> > > > >>
> >> > > > >>
> >> > > > >> Joe Astorino - CCIE #24347
> >> > > > >> Sr. Technical Instructor - IPexpert
> >> > > > >> Mailto: jastorino_at_ipexpert.com
> >> > > > >> Telephone: +1.810.326.1444
> >> > > > >> Live Assistance, Please visit: www.ipexpert.com/chat
> >> > > > >> eFax: +1.810.454.0130
> >> > > > >>
> >> > > > >> IPexpert is a premier provider of Self-Study Workbooks, Video
on
> >> > > > >> Demand, Audio Tools, Online Hardware Rental and Classroom
> >> > > > >> Training
> >> for
> >> > > > >> the Cisco CCIE (R&S, Voice, Security & Service Provider)
> >> > > > >> certification(s) with training locations throughout the United
> >> States,
> >> > > > >> Europe, South Asia and Australia. Be sure to visit our online
> >> > > > >> communities at www.ipexpert.com/communities and our public
> >> > > > >> website
> >> at
> >> > > > >> www.ipexpert.com
> >> > > > >
> >> > > > >________________________________
> >> > > > > The battle for the FIH Hockey World Cup Drag n' drop
> >> > > >
> >> > > >
> >> > > >
> >> > > > --
> >> > > > Regards,
> >> > > >
> >> > > >
> >> > > >
> >> > > > Joe Astorino - CCIE #24347
> >> > > > Sr. Technical Instructor - IPexpert
> >> > > > Mailto: jastorino_at_ipexpert.com
> >> > > > Telephone: +1.810.326.1444
> >> > > > Live Assistance, Please visit: www.ipexpert.com/chat
> >> > > > eFax: +1.810.454.0130
> >> > > >
> >> > > > IPexpert is a premier provider of Self-Study Workbooks, Video on
> >> > > > Demand, Audio Tools, Online Hardware Rental and Classroom Training
> >> > > > for
> >> > > > the Cisco CCIE (R&S, Voice, Security & Service Provider)
> >> > > > certification(s) with training locations throughout the United
> >> > > > States,
> >> > > > Europe, South Asia and Australia. Be sure to visit our online
> >> > > > communities at www.ipexpert.com/communities and our public website
> >> > > > at
> >> > > > www.ipexpert.com
> >> > > >
> >> > > >
> >> > > > Blogs and organic groups at http://www.ccie.net
> >> > > >
> >> > > >
> >>_______________________________________________________________________
> >> > > > Subscription information may be found at:
> >> > > > http://www.groupstudy.com/list/CCIELab.html
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > >
> >> > >_________________________________________________________________
> >> > > Climate, controversies and the changing signatures of nature
> >> > > http://green.in.msn.com/
> >> > >
> >> > >
> >> > > Blogs and organic groups at http://www.ccie.net
> >> > >
> >> >
>_______________________________________________________________________
> >> > > Subscription information may be found at:
> >> > > http://www.groupstudy.com/list/CCIELab.html
> >> >
> >> >
> >> > Blogs and organic groups at http://www.ccie.net
> >> >
> >> >_______________________________________________________________________
> >> > Subscription information may be found at:
> >> > http://www.groupstudy.com/list/CCIELab.html
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >>
> >>_________________________________________________________________
> >> Climate, controversies and the changing signatures of nature
> >> http://green.in.msn.com/
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >>_______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> > ________________________________
> >
> > Invest your money wisely post Budget Sign up now.
> >
> > ________________________________
> > The battle for the FIH Hockey World Cup Drag n' drop
>
>
>
> --
> Regards,
>
>
>
> Joe Astorino - CCIE #24347
> Sr. Technical Instructor - IPexpert
> Mailto: jastorino_at_ipexpert.com
> Telephone: +1.810.326.1444
> Live Assistance, Please visit: www.ipexpert.com/chat
> eFax: +1.810.454.0130
>
> IPexpert is a premier provider of Self-Study Workbooks, Video on
> Demand, Audio Tools, Online Hardware Rental and Classroom Training for
> the Cisco CCIE (R&S, Voice, Security & Service Provider)
> certification(s) with training locations throughout the United States,
> Europe, South Asia and Australia. Be sure to visit our online
> communities at www.ipexpert.com/communities and our public website at
> www.ipexpert.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
Received on Wed May 19 2010 - 23:18:09 ART