Re: OT:Automatic Configuration of 176 APs (through TFTP)

I'm sorry, From my experience I never deployed huge number of APs without a
controller and it doesn't make sense. I will check with cisco documents and
let you know :-)

On Mon, May 10, 2010 at 1:46 PM, karim jamali <karim.jamali_at_gmail.com>wrote:

> Hi Richard,
>
> I am referencing Autonomous APs currently. At some point in time, the
> client will migrate to LWAP APs with a controller. However currently i have
> 176 APs, my idea is to connect a TFTP server and put all the common
> configurations on it, and thus the AP will get an IP address through DHCP
> and then ask for a configuration from a TFTP server? Is this possible.
>
> I really appreciate your help!
>
> Thank You
>
>
> On Mon, May 10, 2010 at 11:13 AM, Richard <ccieking_at_gmail.com> wrote:
>
>> What type of AP? Lightweight or Autonomous
>> Which controller are you using? WiSM or 4404
>> Are you planning to use WCS?
>>
>> I would recommend you to use Lightweight mode AP, WiSM controller and WCS.
>> So you can control all APs via WCS.
>>
>> On Mon, May 10, 2010 at 1:23 PM, karim jamali <karim.jamali_at_gmail.com>wrote:
>>
>>> Dear Gents,
>>>
>>> I have around 176 APs to be configured. Is there any method by which the
>>> AP
>>> can be pushed a configuration from a TFTP server, and thus automate the
>>> configuration process?
>>>
>>> Your help is much appreciated as this will minimize the effort/time
>>> required
>>> to complete a task @ hand.
>>>
>>> Best Regards,
>>>
>>> --
>>> KJ
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>
>
> --
> KJ

Blogs and organic groups at http://www.ccie.net
Received on Mon May 10 2010 - 14:02:07 ART