Re: Need a new terminal server, the old one seems to be broken.

Kambiz,

I agree with you, if you get a 3640, you can use an NM-16a and couple of
octal cables and use them as your access-server, this can be in one of the
slots, and your Frame-relay switching can be handled with one NM-8A/s in the
second slot and a Fastethernet module to your home router, all in one. less
utility bill.

On Thu, Apr 29, 2010 at 4:56 PM, Hans Eriksson <eriksson.hans_at_gmail.com>wrote:

> It was my NM-32A that are broken. So I am trying to find either a used
> NM-32A
> or a used 2511. The good thing is if
> I get a used NM-32A i have the octa-cables.
>
> 2010/4/30 Kambiz Agahian <kagahian_at_ccbootcamp.com>
>
> > Hans,
> >
> > If you have a (NM) modular router you might wish to consider an NM
> > module for instance in a 3640. Of course if you do have one of those
> > routers you can also save some rack space and be green :) .
> >
> > In most countries at the same price you can go for some used 2500 guys
> > with Octal cables (a real mess) or even 2500-RJ without octal cables
> > (this one is usually pricey). For a home rack I'd purchase a used
> > 2511-RJ; it gives you a nice and neat rack.
> >
> > http://www.cisco.com/en/US/i/000001-100000/10001-15000/14001-14500/14479
> > .jpg
> >
> > --------------------------
> > Kambiz Agahian
> > CCIE (R&S)
> > CCSI, WAASSE, RSSSE
> > Technical Instructor
> > CCBOOTCAMP - Cisco Learning Solutions Partner (CLSP)
> > Email: kagahian_at_ccbootcamp.com
> > Toll Free: 877-654-2243
> > International: +1-702-968-5100
> > Skype: skype:ccbootcamp?call
> > FAX: +1-702-446-8012
> > YES! We take Cisco Learning Credits!
> > Training And Remote Racks: http://www.ccbootcamp.com
> > OEQ Voice Waiver: http://www.ccbootcamp.com/noeqvoice.html
> > OEQ R&S Waiver: http://www.ccbootcamp.com/noeqrs.html
> > OEQ Commercial: http://www.ccbootcamp.com/noeq.mpg
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> > Hans Eriksson
> > Sent: Thursday, April 29, 2010 4:27 PM
> > To: ccielab_at_groupstudy.com
> > Subject: Re: Need a new terminal server, the old one seems to be broken.
> > Any suggestions anyone?
> >
> > I will try to find some used 2511, I hope some one in Sweden have those
> > for
> > sale, or else I wll use ebay.
> > Thanks.
> >
> > 2010/4/30 Joe Astorino <jastorino_at_ipexpert.com>
> >
> > > The 2511 is great
> > >
> > >
> > > Sent from my Verizon Wireless BlackBerry
> > >
> > > Regards,
> > >
> > > Joe Astorino - CCIE #24347
> > > Sr. Technical Instructor - IPexpert
> > > Mailto: jastorino_at_ipexpert.com
> > > Telephone: +1.810.326.1444
> > > Live Assistance, Please visit: www.ipexpert.com/chat
> > > eFax: +1.810.454.0130
> > >
> > > IPexpert is a premier provider of Self-Study Workbooks, Video on
> > Demand,
> > > Audio Tools, Online Hardware Rental and Classroom Training for the
> > Cisco
> > > CCIE (R&S, Voice, Security & Service Provider) certification(s) with
> > > training locations throughout the United States, Europe, South Asia
> > and
> > > Australia. Be sure to visit our online communities at
> > > www.ipexpert.com/communities and our public website at
> > www.ipexpert.com
> > >
> > > -----Original Message-----
> > > From: John Lockie <john.lockie_at_gmail.com>
> > > Date: Thu, 29 Apr 2010 16:07:17
> > > To: Hans Eriksson<eriksson.hans_at_gmail.com>; <ccielab_at_groupstudy.com>
> > > Subject: Re: Need a new terminal server, the old one seems to be
> > broken.
> > > Any suggestions anyone?
> > >
> > > Have you considered 2511? :)
> > >
> > >
> > > On 4/29/10 2:53 PM, "Hans Eriksson" <eriksson.hans_at_gmail.com> wrote:
> > >
> > > > Need a new terminal server, the old one seems to be broken. Any
> > > suggestions
> > > > anyone?
> > > >
> > > >
> > > >
> > > > My terminal server seems to bee broken, I have tried different IOS
> > and
> > > > different chassi. I still have the same error. I have tried
> > different
> > > > configurations. But the same error seems to haunting me.
> > > >
> > > >
> > > >
> > > > So I would need a new terminal server, that don t set me back too
> > many
> > > $$$.
> > > > Any ides anyone.
> > > >
> > > > I am no config ace when we talk about terminal server.
> > > > This is what I have be using. I have tried 3620 and 3640 plus
> > diffrent
> > > > slots.
> > > >
> > > >
> > ------------------------------------------------------------------------
> > > > Have tried diffrent configs.
> > > >
> > > > *Standard*
> > > > !
> > > > line con 0
> > > > login local
> > > > line 65 96
> > > > line aux 0
> > > > line vty 0 4
> > > > access-class 1 in
> > > > login local
> > > > !
> > > > *some other config*
> > > > !
> > > > line 65 96
> > > > transport preferred telnet
> > > > transport input telnet
> > > > stopbits 1
> > > > flowcontrol hardware
> > > > !
> > > >
> > > >
> > ------------------------------------------------------------------------
> > -
> > > > error
> > > >
> > ------------------------------------------------------------------------
> > -
> > > >
> > > > Log Buffer (4096 bytes):
> > > > r is not responding, power cycle the router
> > > > 00:01:38: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller is not
> > > responding,
> > > > power cycle the router
> > > > 00:01:41: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller is not
> > > responding,
> > > > power cycle the router
> > > > 00:01:44: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller is not
> > > responding,
> > > > power cycle the router
> > > > 00:01:47: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller is not
> > > responding,
> > > > power cycle the router
> > > > 00:01:50: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller is not
> > > responding,
> > > > power cycle the router
> > > > 00:01:51: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state
> > to up
> > > > *Mar 1 02:04:03.815: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:04:06.815: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:04:09.815: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:04:12.815: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:04:15.815: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:04:18.815: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:04:21.815: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:04:24.815: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:04:24.827: %SYS-3-CPUHOG: Task ran for 24024 msec (0/0),
> > > process
> > > > = Exec, PC = 602F0CD0.
> > > > -Traceback= 602F0CD8 602F1518 602F13E8 60312700 603767D4 603767C0
> > > > *Mar 1 02:04:45.923: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:04:48.923: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:04:51.923: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:04:54.923: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:04:54.923: %SYS-3-CPUHOG: Task ran for 12000 msec (0/0),
> > > process
> > > > = Exec, PC = 602CC4E0.
> > > > -Traceback= 602CC4E8 60192868 6032805C 60304554 60312758 603767D4
> > > 603767C0
> > > > *Mar 1 02:05:07.923: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:05:10.923: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:05:10.923: %SYS-3-CPUHOG: Task ran for 6000 msec (1/1),
> > > process =
> > > > Exec, PC = 602CC4E0.
> > > > -Traceback= 602CC4E8 60192868 6032805C 60304554 60312758 603767D4
> > > 603767C0
> > > > *Mar 1 02:05:23.923: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:05:26.923: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:05:26.931: %SYS-3-CPUHOG: Task ran for 6008 msec (0/0),
> > > process =
> > > > Exec, PC = 602CC4E0.
> > > > -Traceback= 602CC4E8 60192868 6032805C 60304554 60312758 603767D4
> > > 603767C0
> > > > *Mar 1 02:08:28.823: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:08:31.823: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:08:34.823: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:08:37.823: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:08:40.823: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:08:43.823: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:08:46.823: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:08:49.823: %CIRRUS-3-HWNORESPONSE: The CD2430 Controller
> > is
> > > not
> > > > responding, power cycle the router
> > > > *Mar 1 02:08:49.835: %SYS-3-CPUHOG: Task ran for 24024 msec (1/1),
> > > process
> > > > = Exec, PC = 602F0CD0.
> > > > -Traceback= 602F0CD8 602F1518 602F13E8 60312700 603767D4 603767C0
> > > >
> > > >
> > > > Blogs and organic groups at http://www.ccie.net
> > > >
> > > >
> > _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > >
> > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Narbik Kocharians
CCSI#30832, CCIE# 12410 (R&S, SP, Security)
www.MicronicsTraining.com
Sr. Technical Instructor
YES! We take Cisco Learning Credits!
Training And Remote Racks available
Blogs and organic groups at http://www.ccie.net