RE: Representing internal server with 2 different Public IP

Imran -

I have done it before on the ASA with the following:

access-list policy_nat_web1 extended permit ip host 192.168.100.50 any

access-list policy_nat_web2 extended permit ip host 192.168.100.50 any

static (inside,outside) 24.16.171.125 access-list policy_nat_web1

static (inside,outside) 24.16.171.126 access-list policy_nat_web2

Also, just looking at the responses, I see that Swap posted that same about
an hour ago.

Best wishes,

Keith

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
imran mohammed
Sent: Wednesday, April 28, 2010 6:36 AM
To: Cisco certification
Subject: Re: Representing internal server with 2 different Public IP

Hi,

The requirement is I need to represent internal server with 2 different
public ip.

Example

When I hit the firewall 10.1.1.1 on outside it should redirect to 20.1.1.1
(internal server)
If I hit with 30.1.1.1 on outside it should redirect to same ip 20.1.1.1
(internal server)

Regards
Imran

On Wed, Apr 28, 2010 at 5:02 PM, imran mohammed
<imran4cisco_at_gmail.com>wrote:

> Hi All,
>
>
> Is there any way we can represent internal server with 2 public Ip
address.
>
> static (inside,outside) tcp 88.x.x.49 smtp 192.168.0.55 smtp
> static (inside,outside) tcp 88.x.x.51 smtp 192.168.0.55 smtp
>
> The above command doesnt work.I know it doesnt make sense but that is the
> requirement.
>
> I tried this as well doesnt work
> static (inside,outside) tcp 88.x.x.49 smtp 192.168.0.55 smtp
> static (inside,outside) tcp 88.x.x.51 2043 192.168.0.55 smtp
>
> Is there anyway to do this.
>
> Regards
> Imran

Blogs and organic groups at http://www.ccie.net
Received on Wed Apr 28 2010 - 10:43:37 ART