Advertising local host routes in BGP?

I have a situation where I'm trying to advertise only 4 host routes
from a /24 network to my BGP neighbors.
As an example,

#R1
interface g0/0
ip addr 1.1.1.2 255.255.255.0
standby ip 1.1.1.1

router bgp 1
network 1.1.1.4 mask 255.255.255.255
network 1.1.1.5 mask 255.255.255.255
network 1.1.1.7 mask 255.255.255.255
network 1.1.1.9 mask 255.255.255.255

With a single router, a static route to the interface worked fine..

ip route 1.1.1.4 255.255.255.255 g0/0
ip route 1.1.1.5 255.255.255.255 g0/0
ip route 1.1.1.7 255.255.255.255 g0/0
ip route 1.1.1.9 255.255.255.255 g0/0

When adding a redundant router, things initially work as well..

#R2
interface g0/0
ip addr 1.1.1.3 255.255.255.0
standby ip 1.1.1.1

router bgp 1
network 1.1.1.4 mask 255.255.255.255
network 1.1.1.5 mask 255.255.255.255
network 1.1.1.7 mask 255.255.255.255
network 1.1.1.9 mask 255.255.255.255

ip route 1.1.1.4 255.255.255.255 g0/0
ip route 1.1.1.5 255.255.255.255 g0/0
ip route 1.1.1.7 255.255.255.255 g0/0
ip route 1.1.1.9 255.255.255.255 g0/0

The issue arises when R1 fails, R2 has a CEF routing loop..

Troubleshooting Cisco Express Forwarding Routing Loops
Document ID: 26083
http://www.cisco.com/en/US/partner/tech/tk827/tk831/technologies_tech_note09186a00800cdf2e.shtml

The link says the solution is to point the statics to the next hop;
which I can't, as they are local.

Is there another way to advertise these host routes?

I've been trying to use inject-maps, but my own routers are the route
source, and it doesn't appear to work.

Ideas?

Blogs and organic groups at http://www.ccie.net
Received on Thu Apr 15 2010 - 22:37:05 ART