Re: building my own R&S lab

Can I use NM-8A/S in my 3725 frame relay switch in my IE lab or is it too
slow?

On Fri, Apr 2, 2010 at 9:32 AM, Brad Ellis <brad_at_ccbootcamp.com> wrote:

> NM-8A/S - but remember, it's different than the NM-4T. 8A/S only has
> low-speed ports, no high-speed ports like the 4T.
>
> thanks,
> Brad Ellis
> CCIE#5796 (R&S / Security)
> CCSI# 30482
> CEO / President
> CCBOOTCAMP - Cisco Learning Solutions Partner (CLSP)
> Email: brad_at_ccbootcamp.com
> Toll Free: 877-654-2243
> International: +1-702-968-5100
> Skype: skype:ccbootcamp?call
> FAX: +1-702-446-8012
> YES! We take Cisco Learning Credits!
> Training And Remote Racks: http://www.ccbootcamp.com
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> scuba diver
> Sent: Friday, April 02, 2010 5:59 AM
> To: Tyson Scott
> Cc: Iwan Hoogendoorn; Cisco certification
> Subject: Re: building my own R&S lab
>
> All their configurations and frame relay switch use a card that has
> eight
> serial ports in one module : (1/0,1/1,1/2,1/3,1/4,1/5,1/6,1/7). The
> NM-4T
> only has 4 ports per card. What is the name of the card that has the
> eight
> ports ? Somebody please help
> Scuba
>
> On Tue, Dec 29, 2009 at 1:23 PM, Tyson Scott <tscott_at_ipexpert.com>
> wrote:
>
> > Scuba,
> >
> > To build their rack you will need
> > 6 2811's
> > 6 WIC-2T's
> > 8 DB60 to smart-serial back to backs
> > 2 smart serial to smart-serial back to backs
> > 4 3560's
> > 1 older router that will support 2 or more NM modules. I think a 3640
> is a
> > perfect router
> > 2 NM-4T's
> > 1 NM-2E (This is if you want to dual purpose the frame-switch
> for a
> > backbone router)
> > Lots of 7 ft patch cables.
> >
> > You can then use the 3640 as your frame-switch and your backbone
> routers.
> > You can use VRF's on the 3640 to make it appear as several backbone
> > routers.
> >
> > That should be all the equipment you need.
> >
> > I am surprised you are not getting direction from NMC as to how to
> > configure
> > their topology. But you will need to contact them to get their
> frame-relay
> > switch configuration and the BB router configurations. Good Luck in
> your
> > studies.
> >
> > Regards,
> >
> > Tyson Scott - CCIE #13513 R&S, Security, and SP
> > Technical Instructor - IPexpert, Inc.
> > Mailto: tscott_at_ipexpert.com
> > Telephone: +1.810.326.1444, ext. 208
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Apr 02 2010 - 09:51:07 ART