Re: Query: BGP fall-over

If you tie an IP sla to it it will speed it up.

On Tue, Mar 30, 2010 at 7:51 AM, srinivas pv <vsrinivas.paturi_at_gmail.com>wrote:

> Hi Vibeesh,
>
> I think if the router has summary or default IGP route, then fall-over will
> not trigger.
>
> Could you try the same with route-map option under fall-over command where
> the route-map should only permit bgp neighbor?
>
> Thanks,
> Srinivas
>
> On Tue, Mar 30, 2010 at 8:09 PM, Vibeesh S <vibselva_at_gmail.com> wrote:
>
> > Hi,
> >
> > I have bgp configured & running on two routers connected through a
> switch.
> > I
> > have the BGP Fast Peering Session Deactivation configured on both sides.
> > I also have ospf configured on the interfaces.
> >
> > Even when i shut one of the interfaces the bgp session is not terminated
> > for 180 secs.
> > The ospf goes down but nothing really happens with bgp.
> >
> > Am I missing something. Please advice.
> >
> > Thanks,
> > Vibs
> >
> >
> >
> > router bgp 1
> > no synchronization
> > bgp log-neighbor-changes
> > network 1.0.0.0
> > network 2.0.0.0
> > neighbor 192.168.0.2 remote-as 2
> > neighbor 192.168.0.2 fall-over
> > no auto-summary
> >
> > router bgp 2
> > no synchronization
> > bgp log-neighbor-changes
> > neighbor 192.168.0.1 remote-as 1
> > neighbor 192.168.0.1 fall-over
> > no auto-summary
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Narbik Kocharians
CCSI#30832, CCIE# 12410 (R&S, SP, Security)
www.MicronicsTraining.com
Sr. Technical Instructor
YES! We take Cisco Learning Credits!
Training And Remote Racks available
Blogs and organic groups at http://www.ccie.net