Re: VSS question on oversubscription

HI,
PLs see below.
--- On Sat, 13/3/10, Shawn Zandi <szmetal_at_gmail.com> wrote:

From: Shawn Zandi <szmetal_at_gmail.com>
Subject: Re: VSS question on oversubscription
To: "Naufal Jamal" <naufalccie_at_yahoo.in>
Cc: ccielab_at_groupstudy.com
Date: Saturday, 13 March, 2010, 7:55 PM

Naufal,
I assume you're referring to Xenpak, (VSL works on 10G - and it won't work on
all 10G ports e.g it X6704 is not VSL capable) ...

on WS-X6716-10G only non-oversubscribed ports can be used for
VSL... performance mode (1 port used per port group) is it necessary to use
the first port in each port group.to be more clear, can I use port number 2
and remaining 1,3,4 unused in first port-group of the switch for VSS?

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps9336/prod_qas090
0aecd806ed74b.html

-- 
-- 
Sincerely,
Shawn Zandi
Network Architect and Consultant
Cisco Certified CCIE x2 (R&S + Security)
Dubai Internet City
blog: http://blog.shafagh.com
email: shafagh_at_shafagh.com
On Sat, Mar 13, 2010 at 11:18 PM, Naufal Jamal <naufalccie_at_yahoo.in> wrote:
Hi All,
I am configuring VSS on the 16 port GBIC module. there should be 4
port-groups
in the card. My question is that if i want to make a VSL link in this can i
 use only the first port in each port group? ie 1st,5th,9th,13th or can I use
any port in a port-group? If yes, what is the reason for that. I know it
could
only work in performance mode. I gave the no hw-module....... command for
that. Pls help ..
NFL
 
      Your Mail works best with the New Yahoo Optimized IE8. Get it NOW!
http://downloads.yahoo.com/in/internetexplorer/
Blogs and organic groups at http://www.ccie.net