Re: Lab Scenario

i don't see the topology yet but can you consider L2tpv3, or AToM?

On Fri, Mar 5, 2010 at 4:37 PM, Bryan Bartik <bbartik_at_ipexpert.com> wrote:

> Why would you be breaking the Lab rules? If you need to run OSPF on the
> switch you need IP addresses.
>
> On Fri, Mar 5, 2010 at 5:07 PM, Muzammil Malick <malickmuz_at_gmail.com>
> wrote:
>
> > Well vlan 10 is 10.0.0.0/24 subnet with R1 being .1 and the SVI being .2
> > vlan 20 is in 192.168.0.0/24 subnet with R2 being .1 and the SVI being
> .2
> >
> > In this case fallback bridging would not work right? I take it if both
> > sides
> > were in the same subnet then we could bridge the vlans, but because they
> > are
> > in separate subnets the SW must run OSPF for this to work.
> >
> > On 5 March 2010 23:46, Joe Astorino <jastorino_at_ipexpert.com> wrote:
> >
> > > Fallback bridging on the switch may be an option. Do the IP address
> > schemes
> > > on vlans 10 and 20 match?
> > >
> > >
> > > ------Original Message------
> > > From: Muzammil Malick
> > > Sender: nobody_at_groupstudy.com
> > > To: CCIE Groupstudy
> > > ReplyTo: Muzammil Malick
> > > Subject: Lab Scenario
> > > Sent: Mar 5, 2010 6:33 PM
> > >
> > > Guys
> > >
> > > Please consider the following scenario and advise me on what you would
> do
> > > in
> > > this case:
> > >
> > > R1 ----vlan 10----->SW1<-----vlan 20------>R2
> > >
> > > R1 and R2 connect to the switch on different vlans however the topology
> > > provided shows a Layer 3 SVI for vlans 20 and 10 along with ip
> > addressing.
> > > The problem is that I need to run OSPF between the two routers and the
> > > layer
> > > 3 SVIs are not configured in the intial configuration.
> > > Logic would suggest that you run OSPF on the Switch however this would
> > mean
> > > configuring the SVIs on the Switch first.
> > > Now it seems to me that I would be breaking the lab rules if I did this
> > but
> > > the topology provided contradicts this? Am I missing something obvious?
> > >
> > > Thanks in advance
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Regards,
> > >
> > > Joe Astorino CCIE #24347 (R&S)
> > > Sr. Technical Instructor - IPexpert
> > > Mailto: jastorino_at_ipexpert.com
> > > Telephone: +1.810.326.1444
> > > Live Assistance, Please visit: www.ipexpert.com/chat
> > > eFax: +1.810.454.0130
> > >
> > > IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA
> > (R&S,
> > > Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security &
> > Service
> > > Provider) Certification Training with locations throughout the United
> > > States, Europe and Australia. Be sure to check out our online
> communities
> > at
> > > www.ipexpert.com/communities and our public website at
> www.ipexpert.com
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Bryan Bartik
> CCIE #23707 (R&S, SP), CCNP
> Sr. Support Engineer - IPexpert, Inc.
> URL: http://www.IPexpert.com <http://www.ipexpert.com/>
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Narbik Kocharians
CCSI#30832, CCIE# 12410 (R&S, SP, Security)
www.MicronicsTraining.com
Sr. Technical Instructor
YES! We take Cisco Learning Credits!
Training And Remote Racks available
Blogs and organic groups at http://www.ccie.net