I VPN to Pix and then RDP to an always on Windows box that is hardwired to
my LAN on one NIC, and hardwired to the Cisco 2511 access server on the
other. The Windows box is consoled to the access server just in case I run
into any issues, and I reverse telnet to all of my routers and switches
using Secure CRT.
It works but the Windows box is my single point of failure, if it goes down
I lose access to the lab, however I haven't had any issues with that as of
yet... *crosses fingers* :)
Steve Di Bias
On Fri, Mar 5, 2010 at 12:53 PM, Joe Astorino <jastorino_at_ipexpert.com>wrote:
> The way I used to do it was as follows:
>
> 1) I have a BSD box on my network running SSHd
> 2) Setup your router to forward SSH to the BSD box
> 3) SSH to the BSD box, then telnet to your TS which is also setup inside
> your home LAN
>
> This is of course slightly more complicated than it needs to be <shrug> ...
> that is just how I did it. There are other solutions that have been given
> here. I did it that way because my TS was a 2511 that only supported
> telnet, and frankly I didn't want it open to the outside world directly.
>
>
>
> On Fri, Mar 5, 2010 at 3:03 PM, Wildmomo <ccie_lab_at_inetiq.com> wrote:
>
> > James,
> >
> > There are three overall components that you need to be concerned with.
> >
> > 1) TS Server Setup for console access to r/s lab
> > 2) network connectivity for TS to Netgear
> > 3) Traffic Flow NAT/PAT on NetGear
> >
> > As for the TS setup, a quick look at the free resources at INE.com and
> many
> > other sites will breakdown how to configure the TS. Basically you will
> be
> > doing reverse telnet the various lines you will put into play.
> >
> > Network connectivity for the TS. You should manually configure your
> > ethernet interface that connects to the Netgear.
> >
> > you will need to open up SSH or Telnet to your TS via the NG. The
> Netgear
> > should give you an option of UDP/TCP or Both, port number 22 or 23
> depending
> > on telnet or SSH, and an inside IP address field.
> >
> > I prefer SSH but you need to make sure your version of IOS on the TS will
> > support SSH.
> >
> > Consider this the first of many tasks that you will need to complete on
> > your way to obtaining your CCIE. Some quick research on Google can
> fill
> > in any blanks.
> >
> > r/w
> >
> >
> > On Mar 3, 2010, at 9:15 AM, james p wrote:
> >
> > Hello Mates
> >
> >
> >
> > I want to setup remote access to my Lab via Internet.?
> >
> > I have DSL internet access with Netgear Router (1x Eth.) connected to
> > Motorola
> > 5121E Cable TV Modem.
> >
> >
> >
> > If you have experienced this before and configured?
> >
> > Thanks to advise.
> >
> >
> >
> > Kind Regards
> >
> >
> >
> > james
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > > Date: Wed, 3 Mar 2010 13:55:31 +0000
> > > Subject: Re: VWIC-1MFT-G703 and VWIC-1MFT-E1
> > > From: way2ccie_at_googlemail.com
> > > To: tortletang_at_hotmail.com
> > > CC: ccielab_at_groupstudy.com
> > >
> > > Hi Tortle,
> > >
> > > The below link is about the 2nd Gen of these VWIC cards but this will
> > solve
> > > the query you have
> > >
> > >
> >
> >
> http://www.cisco.com/en/US/prod/collateral/routers/ps5855/prod_qas0900aecd802
> > 8d2e5.html<
> http://www.cisco.com/en/US/prod/collateral/routers/ps5855/prod_qas0900aecd802%0A8d2e5.html
> >
> > >
> > > HTH,
> > > Ravi
> > >
> > > On Wed, Mar 3, 2010 at 11:52 AM, Tortle Tang <tortletang_at_hotmail.com>
> > wrote:
> > >
> > >> Hi Shaughn
> > >>
> > >>
> > >>
> > >> From what I know is G703 can cover what E1 can do , and additionally
> > G703
> > >> support unframed(2048k). Is it correct ?
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> Thanks,
> > >>
> > >> Tortle
> > >>
> > >>
> > >>
> > >>
> > >>> Subject: RE: VWIC-1MFT-G703 and VWIC-1MFT-E1
> > >>> Date: Wed, 3 Mar 2010 13:07:39 +0200
> > >>> From: shaughn.s_at_cvnnet.co.za
> > >>> To: tortletang_at_hotmail.com; ccielab_at_groupstudy.com
> > >>>
> > >>> E1 and G703 are different technologies that both accomplish the same
> > >>> thing.
> > >>>
> > >>> google/wiki is your friend.
> > >>>
> > >>>
> > >>> CCIE # 23962 (SP)
> > >>>
> > >>> -----Original Message-----
> > >>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf
> > Of
> > >>> Tortle Tang
> > >>> Sent: Wednesday, March 03, 2010 11:53 AM
> > >>> To: ccielab_at_groupstudy.com
> > >>> Subject: VWIC-1MFT-G703 and VWIC-1MFT-E1
> > >>>
> > >>> Hi Guys
> > >>>
> > >>> Anyone know what is different between VWIC-1MFT-G703 and VWIC-1MFT-E1
> > >>> ? Can
> > >>> both of them be used in the Voice lab ?
> > >>>
> > >>> Thanks,
> > >>> Tortle
> > >>>
> > >>>
> > >>>
> > >>> _________________________________________________________________
> > >>> Get personal with Windows. Download a free gift for your PC.
> > >>> http://experience.windows.com
> > >>>
> > >>>
> > >>> Blogs and organic groups at http://www.ccie.net
> > >>>
> > >>>
> _______________________________________________________________________
> > >>> Subscription information may be found at:
> > >>> http://www.groupstudy.com/list/CCIELab.html
> > >>>
> > >>>
> > >>> Blogs and organic groups at http://www.ccie.net
> > >>>
> > >>>
> _______________________________________________________________________
> > >>> Subscription information may be found at:
> > >>> http://www.groupstudy.com/list/CCIELab.html
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>
> > >> _________________________________________________________________
> > >> Looking for a new home? With all the latest places, searching has
> never
> > >> been
> > >> easier.
> > >> http://clk.atdmt.com/NMN/go/157631292/direct/01/
> > >>
> > >>
> > >> Blogs and organic groups at http://www.ccie.net
> > >>
> > >>
> _______________________________________________________________________
> > >> Subscription information may be found at:
> > >> http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> > _________________________________________________________________
> > Hotmail: Powerful Free email with security by Microsoft.
> > https://signup.live.com/signup.aspx?id=60969
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Regards,
>
> Joe Astorino CCIE #24347 (R&S)
> Sr. Technical Instructor - IPexpert
> Mailto: jastorino_at_ipexpert.com
> Telephone: +1.810.326.1444
> Live Assistance, Please visit: www.ipexpert.com/chat
> eFax: +1.810.454.0130
>
> IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S,
> Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security &
> Service
> Provider) Certification Training with locations throughout the United
> States, Europe and Australia. Be sure to check out our online communities
> at
> www.ipexpert.com/communities and our public website at www.ipexpert.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- -Steve Di Bias Blogs and organic groups at http://www.ccie.netReceived on Fri Mar 05 2010 - 14:04:16 ART
This archive was generated by hypermail 2.2.0 : Thu Apr 01 2010 - 07:26:34 ART