Re: OT:Voice Gateway & CUCM Problem

The problem is farrukh that i thought the problem relates to the TCL script;
however when I removed i observed that the problem is related to the
collection of digits. When i dial into FXO port (the port opens a secondary
dialtone) and i input an internal extension the debug voice dialpeer inout
shows a different extension than the one I input (let us say i input
5013..sometimes it shows as 501, 503, 501T)...etc..
This behavior I am not able to understand.

On Tue, Feb 16, 2010 at 9:43 PM, Farrukh Haroon <farrukhharoon_at_gmail.com>wrote:

> Ahh ok much clear now (I forgot this was a FXO hehe). The IOS TCL scripts
> do have a lot of bugs. I would suggest upgrading to the latest available,
> and open a TAC Case, we've faced similar strange issues with them with one
> customer here.
>
> Regards
>
> Farrukh
>
>
> On Tue, Feb 16, 2010 at 9:17 PM, karim jamali <karim.jamali_at_gmail.com>wrote:
>
>> This is an analog FXO port. So the whole number is sent.
>> Plus I am able to dial into the number from outside (mobile for instance)
>> and reach the router (even the script works).The problem is that when I
>> attempt to place a call towards an internal extension (Post script) the
>> debug voice dial-peer many times shows me a different number/extension than
>> the one I have dialed, other times it works. I can't understand the reason.
>>
>> Thank You farrukh for your continuous help & support:)
>>
>>
>>
>> On Tue, Feb 16, 2010 at 9:14 PM, Farrukh Haroon <farrukhharoon_at_gmail.com>wrote:
>>
>>> If you have DID, the provider will only send the last 3 or 4 digits (at
>>> least this is how STC does it in Saudi), not all 7.
>>>
>>> Regards
>>>
>>> Farrukh
>>>
>>> On Tue, Feb 16, 2010 at 9:11 PM, karim jamali <karim.jamali_at_gmail.com>wrote:
>>>
>>>> hi,
>>>>
>>>> I have an FXO port connected to PSTN. I am trying to place a call from
>>>> outside to inside by just dialling into the analog port number, which
>>>> after
>>>> a couple of rings opens a secondary tone and then I dial an internal
>>>> extension. The problem I am facing is related to digit collection; where
>>>> the
>>>> digits I am dialling are not always the digits I see in the debug voice
>>>> dial-peer inout for a reason I can't understand and this leads to the
>>>> call
>>>> being unrouted properly. I have tried this without TCL script (by
>>>> dialling
>>>> into analog line which opens secondary dial tone) and with TCL script
>>>> (simple script which just welcomes the caller and asks him to put
>>>> extension).The weird thing is that it works sometimes & other times it
>>>> doesn't work.
>>>>
>>>> Any help will be much appreciated!
>>>>
>>>> Best Regards.
>>>>
>>>>
>>>>
>>>> On Tue, Feb 16, 2010 at 2:20 PM, mohammed shoeb ahmed <
>>>> mdshoeb_at_gmail.com>wrote:
>>>>
>>>> > Would you please clarify what you are trying to achieve here, if you
>>>> are
>>>> > testing auto attendant then "Connection Plar 600" would be needed
>>>> under your
>>>> > voice ports.
>>>> >
>>>> >
>>>> >
>>>> > --
>>>> > Best Regards,
>>>> >
>>>> > Mohammed Shoeb Ahmed
>>>> >
>>>> > Sr. Consultant,
>>>> > CCIE 18379
>>>> >
>>>>
>>>>
>>>>
>>>> --
>>>> KJ
>>>>
>>>>
>>>> Blogs and organic groups at http://www.ccie.net
>>>>
>>>> _______________________________________________________________________
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>
>>
>> --
>> KJ
>>
>
>

-- 
KJ
Blogs and organic groups at http://www.ccie.net