Dear Sarad,
Yes, It is a GNS FR Switch Issue. It is working fine If you configure
router as a FR switch.
Regards,
Anser
On Sat, Feb 13, 2010 at 9:21 AM, Sarad <tosara_at_gmail.com> wrote:
> Hi Expert,
>
> I am doing some IE expert practice labs there I want to configure two
> routers with two links ( one frame relay the other point to point serial)
> using static routes.
>
> In the frame relay interface one router is configured as a PTP spoke router
> configuration of this router is as follows
>
> Rack1R4#sh run int s0/0.1
> Building configuration...
>
> Current configuration : 115 bytes
> !
> interface Serial0/0.1 point-to-point
> ip address 155.1.0.4 255.255.255.0
> frame-relay interface-dlci 405
> end
>
> Rack1R4#sh run int s0/0
> Building configuration...
>
> Current configuration : 139 bytes
> !
> interface Serial0/0
> no ip address
> encapsulation frame-relay
> shutdown
> clock rate 2000000
> cdp enable
> no frame-relay inverse-arp
> end
>
>
> the other router is configured as a hub & configuration of that is as
> follows
>
> Rack1R5#sh run int s0/0
> Building configuration...
>
> Current configuration : 286 bytes
> !
> interface Serial0/0
> ip address 155.1.0.5 255.255.255.0
> encapsulation frame-relay
> clock rate 2000000
> cdp enable
> frame-relay map ip 155.1.0.1 501
> frame-relay map ip 155.1.0.2 502
> frame-relay map ip 155.1.0.3 503
> frame-relay map ip 155.1.0.4 504
> no frame-relay inverse-arp
> end
>
>
> Problem I am facing at the movement is when I shut down a main interface of
> frame relay network of any of this router the PVC status of the other end
> router does not go to inactive.
>
> Wonder this is a issue with the GNS or I have missed anything in the config.
>
> Thanks
>
> Sara
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Sat Feb 13 2010 - 10:30:35 ART
This archive was generated by hypermail 2.2.0 : Mon Mar 01 2010 - 06:28:35 ART